Honda GX270 8.5HP 270cc Engine – 22mm Shaft, Forced Air Cooled (ID 18499)
For daily runtime, Honda GX270 puts out 8.5 horsepower. A 270cc block backs up the output, and torque peaks at 38.2 Nm. A 3-year warranty backs the build.
- Produces 8.5 horsepower at rated load
- Runs on a 270cc engine block
- Torque tops out at 38.2 Nm
- Shaft measures 22mm, horizontal configuration
- Simple pull-cord start, nothing to charge
Description
During continuous 8-hour agricultural spraying runs, the Honda GX270 horizontal engine (ID 18499) maintains steady shaft output under varying chemical pump resistance. Field spraying operations demand reliable power to maintain uniform nozzle pressure across extensive acreage. This 270cc 8.5HP engine incorporates an overhead valve cylinder layout and a precision 22mm metric output shaft engineered to drive imported diaphragm spray pumps without speed drift.
An internal splash lubrication slinger coats connecting rod journals and wrist pins in motor oil, stopping metal friction under continuous full-throttle operation. The heavy-duty manual recoil starter uses an automatic mechanical decompressor that vents cylinder pressure during cranking, making pull-starts smooth and quick on cold mornings. The cleanable dual-stage air filtration unit stops chemical dust and field chaff from entering the carburetor, ensuring steady engine idling between spray passes.
Technical Features of Honda GX270 (ID 18499)
- 270cc 8.5HP Commercial OHV Engine: Produces dependable rotational torque to drive high-pressure agricultural spray pumps.
- 22mm Metric Straight Keyed Shaft: Matches imported European diaphragm pumps, spray gearboxes, and multi-groove pulleys.
- Durable Cast-Iron Cylinder Sleeve: Resists bore wear from abrasive dirt, extending engine life in severe commercial service.
- Dual-Element Commercial Air Filter: Seals tight against the carburetor body to stop dirt intrusion in dusty conditions.
- Integrated Honda Oil Alert: Shuts down the ignition automatically if crankcase oil falls below safe operating levels.
Heavy-Duty Architecture & Low Maintenance
Designed for demanding commercial service, this 22mm shaft horizontal engine provides steady power output with minimal field maintenance requirements.
- A rigid aluminum crankcase casting and precision-machined 22mm shaft journal resist side-load belt stress.
- Overhead valve efficiency delivers clean fuel combustion to reduce carbon accumulation on valve faces.
- Agricultural chemical applicators and landscape contractors secure dependable machine uptime across peak spraying seasons.
Equipment Integration & Fitment Specs
Weighing 55 pounds dry with a universal 4-bolt horizontal mounting base and 22mm shaft, this motor repowers skid-mounted chemical sprayers, pressure washers, commercial turf edgers, and dewatering pumps without deck modifications.
Commercial Coverage & Maintenance Upkeep
- Factory warranty terms provide 3-Year commercial and consumer coverage on all core mechanical assemblies.
Service this engine with fresh 10W-30 motor oil every 100 operating hours. Tap clean the air filter element weekly on dusty job sites, and maintain the spark plug electrode gap at 0.028 to 0.031 inches. Order the Honda GX270 horizontal shaft engine (ID 18499) from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.
Honda GX270-RSC2 (Reduction) Technical Specs
| Brand | Honda |
| Full Model Code | GX270-RSC2 |
| Country of Origin | Japan |
| Engine Orientation | Horizontal Shaft |
| Engine Type | 4-Stroke, OHV, Single Cylinder |
| Displacement | 270 cc |
| Bore x Stroke | 77 x 58 mm |
| Compression Ratio | 8.5:1 |
| Maximum Output | 6.3 kW (8.5 HP) @ 1800 RPM (Shaft Speed) |
| Maximum Torque | 38.2 Nm (28.2 lbs-ft) @ 1250 RPM (Shaft Speed) |
| Specific Fuel Consumption | 2.4 L/hr @ 3600 RPM |
| Fuel Induction System | Butterfly Carburetor |
| Ignition System | Digital CDI |
| Start System | Recoil Start |
| Shaft Specification | 22 mm Straight Keyway (2:1 Reduction Gearbox) |
| Fuel Tank Capacity | 5.3 Liters |
| Oil Capacity & Type | 1.1 Liters / SAE 10W-30 |
| Cooling System | Forced Air Cooled |
| Dry Weight | 28.8 kg |
| Dimensions | 405 x 428 x 422 mm |
| Standard Warranty | 3 Years |
| Primary Application | Cement Mixers, Power Trowels, Slow-Speed Conveyors |












Reviews
There are no reviews yet.