Honda GXV390 11.7HP 389cc Engine – 1in Vertical Shaft, Electric Start
No guesswork, Honda GXV390 generates 11.7 horsepower. A 389cc block backs up the output, and torque peaks at 24.2 Nm. A 3-year warranty backs the build. Electric Start gets it running without a fuss.
- Puts out 11.7 horsepower reliably
- The 389cc block handles the load
- Peak torque reaches 24.2 Newton-meters
- A 1in vertical shaft, standard mount
- Electric start, no pull cord needed
Description
Displacing 389cc through an overhead valve chamber, the Honda GXV390 vertical engine sustains steady rotational torque under heavy commercial turf resistance. Commercial lawn tractors and zero-turn mowers face severe deck drag when clearing overgrown grass, causing lesser engines to overheat and lose RPM. This 11.7HP commercial engine features an overhead valve cylinder head, an electric starter, and a cast-iron cylinder sleeve that maintains true bore geometry under continuous summer heat.
A precision-machined 1-inch vertical output shaft couples straight to commercial electric clutches and ground-drive belt pulleys without custom adapter shims. Full-pressure lubrication circulates filtered motor oil directly to high-load rod bearings, ensuring uninterrupted fluid barrier protection during continuous full-throttle mowing. The commercial-grade carburetor meters fuel with precision across varying load demands, preventing engine hesitation when mower decks encounter thick, wet turf patches.
Technical Specifications of Honda GXV390
- 389cc Commercial OHV Powerplant: Produces 11.7 net horsepower to drive wide commercial cutting decks without engine bog.
- 1-Inch Straight Keyed Shaft: Handles high radial belt loads and electric PTO clutches without shaft deflection.
- Full-Pressure Lubrication with Spin-On Filter: Keeps rod journals and camshaft lobes coated in pressurized motor oil.
- Durable Cast-Iron Cylinder Sleeve: Resists bore wear from abrasive dirt, extending engine life in severe commercial service.
- 12-Volt Key-Start Electric Motor: Spins the engine flywheel with key activation to eliminate manual starting effort.
Jobsite Performance & Wear Resistance
Designed for professional commercial mowing contractors, this vertical engine delivers reliable shaft power with low fuel consumption.
- A rigid aluminum crankcase casting and precision-machined shaft journals resist side-load belt stress under high tension.
- Overhead valve efficiency delivers clean fuel combustion to reduce carbon accumulation on valve faces.
- Commercial lawn care contractors and estate groundskeepers gain dependable power for high-hour machinery.
- Standard base bolt dimensions allow fast drop-in repower swaps without deck drilling or fabrication delays.
Target Machinery & Drop-In Fitment
Weighing 72.8 pounds dry with an industry-standard vertical mounting base and 1-inch shaft, this motor repowers commercial lawn tractors, wide-area walk-behinds, and zero-turn turf mowers without frame modifications.
Commercial Warranty & Preventive Maintenance
- Commercial purchasers receive 3-Year limited factory warranty coverage for industrial use.
- Consumer buyers receive 3-Year comprehensive manufacturer warranty protection.
Drain engine oil after the initial 20 operating hours, then service every 100 hours with SAE 30 or 10W-30 oil and a new filter. Inspect the air filter weekly on dry cutting routes, and maintain spark plug gaps at 0.028 to 0.031 inches. Order the Honda GXV390 vertical shaft engine from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.
Honda GXV390-DEX3 Technical Specs
| Brand | Honda |
| Full Model Code | GXV390-DEX3 |
| Country of Origin | Japan |
| Engine Orientation | Vertical Shaft |
| Engine Type | 4-Stroke, OHV, Single Cylinder |
| Displacement | 389 cc |
| Bore x Stroke | 88 x 64 mm |
| Compression Ratio | 8.2:1 |
| Maximum Output | 8.7 kW (11.7 HP) @ 3600 RPM |
| Maximum Torque | 24.2 Nm (17.8 lbs-ft) @ 2500 RPM |
| Specific Fuel Consumption | 3.5 L/hr @ 3600 RPM |
| Fuel Induction System | Butterfly Carburetor |
| Ignition System | Digital CDI |
| Start System | Electric Start |
| Shaft Specification | 1" (25.4 mm) Vertical Straight Keyway |
| Fuel Tank Capacity | Data not released (External) |
| Oil Capacity & Type | 1.1 Liters / SAE 10W-30 |
| Cooling System | Air Cooled |
| Dry Weight | 33.1 kg |
| Dimensions | 433 x 407 x 410 mm |
| Standard Warranty | 3 Years |
| Primary Application | Ride-on Mowers, Lawn Tractors, Turf Equipment |












Reviews
There are no reviews yet.