Mercury 20EL turns out 20 horsepower. The 20-inch shaft works with remote mechanical steering. Common on small aluminum boats and light jon boats. Anglers rely on it for predictable starts, trip after trip.

• 20 horsepower on tap
• 20-inch shaft for most transoms
• Remote mechanical steering included
• Electric start, push-button ignition
• Light enough for easy mounting

For open water, Mercury 20ELH produces 20 horsepower. A 20-inch shaft pairs with tiller steering. FourStroke rounds out the build. Owners choose it for steady output without excess weight.

• 20 horsepower on tap
• Fits 20-inch transom height
• Tiller steering, simple setup
• Electric start, push-button ignition
• FourStroke fuel delivery system

Straight talk: Mercury 20EPT channels 20 horsepower. Remote steering and a 15-inch shaft round out the setup. EFI backs up the rated output. Popular among owners of small aluminum boats and light jon boats.

• 20 horsepower, ready to run
• Fits 15-inch transom height
• Remote steering, hands-free operation
• Power trim adjusts running angle
• EFI fuel delivery system

For open water, Mercury 20MH runs on 20 horsepower. A 15-inch shaft pairs with tiller steering. The block runs EFI technology. It favors reliability over extra complexity at the helm.

• 20 horsepower, ready to run
• 15-inch shaft for most transoms
• Tiller steering, simple setup
• Manual start, no battery needed
• EFI fuel delivery system

Steering stays direct, Mercury 225CXL puts 225 horsepower to work. A 25-inch shaft carries counter-rotating gears for twin-engine rigs. The Cold Fusion White finish resists everyday scuffs. Common on center consoles and cruisers.

• Rated at 225 horsepower
• 25-inch shaft, standard fit
• Pairs with a standard-rotation twin
• DTS digital throttle and shift
• V6 engine, proven configuration

Simple rigging, Mercury 225CXXL gets to work with 225 horsepower. Built for twin installs, it counters prop torque on the opposite side. Finished in Cold Fusion White for a clean look on the water.

• 225 horsepower on tap
• 30-inch shaft for most transoms
• Counter-rotating gears for twin engines
• DTS digital throttle and shift
• V6 engine, proven configuration

Straight talk: Mercury 225XXL supplies 225 horsepower. A 30-inch shaft fits standard transoms. V6 and FourStroke rounds out the build. It keeps the rigging simple for first-time outboard buyers.

• 225 horsepower on tap
• Shaft length 30 inches
• FourStroke fuel delivery system
• Built for sustained offshore running
• Rated at 225 horsepower

For paired rigs, Mercury 250CXL generates 250 horsepower. A 25-inch shaft carries counter-rotating gears for twin-engine rigs. Owners choose it for steady output without excess weight. Popular among owners of center consoles and cruisers.

• 250 horsepower, ready to run
• 25-inch shaft, standard fit
• Balances torque on twin installs
• DTS digital throttle and shift
• V8 engine, proven configuration

No cables, Mercury 250XL packs 250 horsepower. A 25-inch shaft fits standard transoms. Part of the Verado lineup. First-time buyers like the low learning curve at the helm.

• Rated at 250 horsepower
• 25-inch shaft for most transoms
• DTS digital throttle and shift
• V8 engine, proven configuration
• Backed by standard marine warranty

Quiet by design, Mercury 250XXL keeps pace at 250 horsepower. A 30-inch shaft fits standard transoms. Part of the Verado lineup. A fit for center consoles and cruisers.

• Rated at 250 horsepower
• Fits 30-inch transom height
• DTS digital throttle and shift
• V8 engine, proven configuration
• Straightforward to service and maintain

For charter work, Mercury 25ELH steps up with 25 horsepower. Tiller steering and a 20-inch shaft round out the setup. FourStroke rounds out the build. Well matched to small aluminum boats and light jon boats.

• 25 horsepower on tap
• Shaft length 20 inches
• Tiller steering, simple setup
• Electric start, push-button ignition
• FourStroke fuel delivery system

For deeper transoms, Mercury 25ELHGA answers with 25 horsepower. The jet drive skips the prop entirely for skinny water. The layout favors easy servicing over a season of use.

• Built for shallow, rocky water
• 25 horsepower on tap
• 15-inch shaft, standard fit
• Tiller steering, simple setup
• Backed by standard marine warranty

Built simple, Mercury 25EPT runs on 25 horsepower. The 15-inch shaft works with remote steering. EFI backs up the rated output. It keeps the rigging simple for first-time outboard buyers.

• 25 horsepower on tap
• 15-inch shaft, standard fit
• Remote steering, hands-free operation
• Power trim adjusts running angle
• EFI fuel delivery system

For twin rigs, Mercury 25EXLPT packs 25 horsepower. Transom height calls for the 25-inch shaft. Part of the ProKicker lineup. Well matched to small aluminum boats and light jon boats.

• 25 horsepower on tap
• Fits 25-inch transom height
• Power tilt for easy trailering
• Part of the ProKicker line
• Light enough for easy mounting