Mercury 25ELH 25HP Outboard – 20in Shaft, Tiller, Electric Start, FourStroke
For charter work, Mercury 25ELH steps up with 25 horsepower. Tiller steering and a 20-inch shaft round out the setup. FourStroke rounds out the build. Well matched to small aluminum boats and light jon boats.
- 25 horsepower on tap
- Shaft length 20 inches
- Tiller steering, simple setup
- Electric start, push-button ignition
- FourStroke fuel delivery system
Description
Deploy the electric-start, long-shaft Mercury 25ELH to eliminate water pump starvation on tall utility boats. The 500cc inline-three EFI block forces immediate low-end torque, pushing heavily loaded camp boats upriver instantly. Measuring your transom confirms this 20 inch long shaft tiller outboard operates safely without sucking surface air.
Fighting dead cranking batteries miles from the dock? The battery-free EFI system acts as a built-in mechanical failsafe. You can manually rope-start the 64 kg block if the 12-volt system completely fails. Mercury engineers the internal forward and reverse gears from hardened steel alloys. This rigid drivetrain handles violent propeller strikes against submerged river stones when repowering tall transom utility boats.
Key Features of Mercury 25ELH
- 20-Inch Extended Shaft: Places the anti-ventilation plate cleanly under tall utility transoms, stopping air ingestion and severe propeller slippage.
- Electric Start with Manual Backup: Engages instantly via a push-button, while battery-free EFI allows a manual pull-start if your battery dies entirely.
- Multi-Function Tiller Handle: Puts throttle, shift, and steering inputs firmly in your operating hand for immediate physical obstacle avoidance.
- Manual Tilt Lock Mechanism: Holds the lower unit completely out of the water physically, preventing damaging marine algae growth while docked.
- 17-Amp Charging Alternator: Generates constant electrical current underway, keeping deep cycle batteries charged for fish finders and aerator pumps.
- Hardened Steel Gears: Handles violent propeller strikes against submerged river stones without shattering internal gear teeth inside the 2.17:1 gearcase.
- Low-Copper Aluminum Castings: Forms a rigid structural barrier, defying severe saltwater corrosion when operating heavily in harsh coastal estuaries.
- Adjustable Steering Friction: Lets the operator physically set the tiller turning resistance, drastically reducing arm fatigue during long river transits.
- Upfront Gear Lube Drain: Allows quick servicing of lower unit fluids, ensuring routine maintenance without requiring specialized dealership tools.
- Clean Four-Stroke Powerhead: Completely eliminates two-stroke oil mixing requirements, preventing accidental fuel spills and dangerous oil slicks on pristine waters.
Why Choose Mercury 25ELH
This specific build fits only 20-inch transoms requiring direct tiller operation. The extended shaft creates massive drag if mounted on a standard 15-inch boat. You cannot wire this to a forward console steering wheel. Procuring an electric start mercury tiller secures heavy-duty off-grid reliability.
- Confirm a 20-inch vertical measurement from the transom top to the keel.
- Verify the tiller handle sweep path clears your rear bench seating completely.
- Avoid oil slicks on the water utilizing modern four-stroke internal lubrication.
Ideal Application and Vessel Fitment
Engineered for high-transom 14-16ft aluminum utility skiffs, heavy fiberglass camp boats, and commercial river-running hulls. The 20-inch shaft ensures the gearcase remains deeply submerged below tall, buoyant transoms to prevent dangerous ventilation in rough river currents. It perfectly balances the luxury of push-button electric starting with the absolute fail-safe of battery-free manual rope ignition, making it the ultimate off-grid power plant for backcountry hunting lodges and remote coastal fishing camps.
Warranty, Support and Maintenance
Authorized recreational operation receives a 3-Year Limited Warranty alongside a 3-Year Corrosion Warranty. Registered commercial applications fall under a strict 1-Year Limited Warranty with zero corrosion coverage applied to the block. Scheduled maintenance requires replacing gearcase lubricants and changing oil filters at manual-specified intervals. Always save all physical service records. Your engine serial number acts as the only way to source exact genuine replacement parts. Mulmotor provides pre-purchase product guidance and order-related customer support.
Mercury 25HP 25ELH FourStroke Specs
| Brand | Mercury Marine |
| Full Model Code | 25ELH FourStroke EFI |
| Engine Type | Inline 3-Cylinder SOHC |
| Displacement | 500 cc |
| Horsepower | 25 HP |
| Full Throttle RPM Range | 5400-5800 RPM |
| Fuel Induction System | Electronic Fuel Injection (EFI) |
| Alternator Output | 17 Amps |
| Gear Ratio | 2.17:1 |
| Shaft Length | L (20 inch) |
| Dry Weight | 64 kg |
| Starting & Steering System | Electric Start / Tiller Handle |
| Trim/Tilt Method | Manual Tilt |
| Features | Battery-Free EFI, Multi-Function Tiller Handle |
| Application | Aluminum Fishing Boats, Utility Skiffs 14-16ft |













Reviews
There are no reviews yet.