Kohler CH730-3208 23.5HP 747cc V-Twin Engine – 1-1/8in Shaft, Electric Start

Description

Cast with centrifugally spun iron cylinder sleeves, the Kohler CH730-3208 horizontal engine withstands continuous high-RPM running on industrial hydraulic power packs. Heavy hydraulic systems place severe continuous load resistance on small engines, which causes overheating and thrown connecting rods on consumer powerheads. This 747cc 23.5HP Command PRO commercial engine features an overhead valve configuration, hydraulic valve lifters, and an electric starter that spins the crankshaft with immediate key-switch engagement.

A precision 1-1/8-inch horizontal output shaft couples straight to commercial hydraulic pump jaw couplings and multi-groove drive pulleys without shaft deflection. Full-pressure lubrication coats internal rod journals and bearings in motor oil through a spin-on filter, stopping friction wear under continuous full-throttle operation. The dual-element air filtration system blocks soil dust and pulverized field debris, preserving internal compression over hundreds of hours on commercial utility projects.

Technical Specifications of Kohler CH730-3208

• 747cc 23.5HP Commercial V-Twin: Delivers robust rotational torque to drive heavy hydraulic power units and rescue tools.
• 1-1/8-Inch Horizontal PTO Drive Shaft: Universal diameter fits standard commercial hydraulic pumps and transmission drive pulleys.
• Dual-Element Commercial Air Cleaner: Traps fine dust particles across two media layers to preserve cylinder wall compression.
• Full-Pressure Lubrication System: Pumps clean oil continuously through an automotive spin-on filter to shield critical bearings.
• 12-Volt Solenoid Shift Electric Starter: Provides fast key-turn starts that eliminate operator pull-cord fatigue.
• Durable Cast-Iron Cylinder Bore Liners: Maintains cylinder roundness and ring seal when operating in harsh commercial environments.
• Hydraulic Valve Lifters: Automatically maintain zero valve clearance, eliminating periodic valve lash maintenance.
• Mechanical Engine Governor: Stabilizes engine RPM automatically when hydraulic valves shift under peak line pressure.

Operational Reliability in Commercial Service

This engine delivers dependable commercial utility stamina while handling severe torsional shock loads on industrial hydraulic systems.

• An oversized 1-1/8-inch horizontal output shaft handles high radial belt tension and direct coupling shocks without bending.
• Centrifugally cast iron cylinder lining and thick crankcase casting prevent thermal distortion during continuous operation.
• Hydraulic equipment operators and utility contractors gain dependable power for high-hour machinery.
• Standard horizontal base bolt dimensions allow fast drop-in repower swaps without deck modification delays.

Machinery Compatibility & Chassis Mounting

Weighing 94 pounds dry with an industry-standard horizontal mounting base and 1-1/8-inch shaft, this motor powers commercial hydraulic power packs, rescue tools, pipe benders, and high-GPM trash pumps without frame alterations.

Warranty Coverage & Preventive Maintenance

• Commercial fleet operators receive 3-Year limited factory warranty coverage against component defects.
• Residential and estate owners receive 3-Year complete consumer warranty protection.

Maintain peak performance by changing oil and filter every 100 hours with standard 10W-30 engine oil, cleaning the air filter cartridge weekly on dry routes, and checking the spark plug gap at 0.030 inches. Order the Kohler CH730-3208 horizontal shaft engine from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.