Kohler CH680-3091 22.5HP 674cc V-Twin Engine – 1-1/8in Shaft, Electric Start
Kohler CH680-3091 sends 22.5 horsepower to the shaft. A 674cc block backs up the output, and torque peaks at 47.5 Nm. It's built for industrial chippers and professional turf care.
- Rated for 22.5 horsepower output
- Displacement comes in at 674cc
- Torque tops out at 47.5 Nm
- Shaft measures 1-1/8in, horizontal configuration
- Starts at the turn of a key
Description
Repower heavy commercial log splitters with the Kohler CH680-3091 horizontal shaft engine to restore aggressive splitting power on large timber processing jobs. Firewood processing operations place heavy continuous load spikes on small engines, which causes overheating and thrown connecting rods on consumer powerheads. Kohler builds this 674cc 22.5HP Command PRO engine with an oversized 1-1/8-inch output shaft, full-pressure lubrication, and an overhead valve cylinder layout engineered to maintain pump drive speed.
An internal oil pump circulates pressurized motor oil to crankshaft journals through an automotive-style spin-on filter, keeping moving parts shielded on remote timber processing sites. The 1-1/8-inch horizontal shaft handles two-stage hydraulic pump jaw couplings and multi-groove drive belts without lateral deflection. The dual-element commercial air cleaner stops sawdust and grading grit before air reaches the carburetor venturi, preserving compression over multiple working seasons.
Engine Architecture of Kohler CH680-3091
- 674cc 22.5HP Commercial V-Twin: Generates 22.5 horsepower to power two-stage hydraulic pumps through knotty logs.
- 1-1/8-Inch Keyed Horizontal PTO Shaft: Matches heavy drive pulleys, centrifugal clutches, and direct-drive gearboxes.
- Full-Pressure Oil Lube with Spin-On Filter: Pumps filtered oil continuously to crankshaft journal inserts and rod bearings.
- Durable Cast-Iron Cylinder Sleeves: Resists bore wear from abrasive dirt, extending engine life in severe commercial service.
- Dual-Stage Commercial Canister Air Cleaner: Traps fine dust particles across two media layers to preserve cylinder wall compression.
- 12V Electric Starter Motor: Spins the flywheel ring gear with key activation to eliminate manual starting effort.
Commercial Advantages & Heavy-Duty Build
Built for forestry and timber processing tasks, this twin-cylinder horizontal engine delivers reliable torque without excessive maintenance costs.
- Centrifugally cast iron cylinder sleeves and a reinforced crankcase base withstand continuous heavy belt drive loads.
- High combustion efficiency lowers fuel burn per splitting shift, cutting daily operating expenses across commercial operations.
Commercial Equipment Applications & Fit
Weighing 90 pounds dry with an industry-standard 4-bolt horizontal mounting base and 1-1/8-inch shaft, this motor mounts directly onto commercial log splitters, high-output trash pumps, mobile hydraulic units, and firewood processors without adapter plates.
Warranty Protection & Routine Upkeep
- Factory warranty terms provide 3-Year commercial and consumer coverage on all core mechanical assemblies.
Service this engine with fresh 10W-30 motor oil and a new filter every 100 operating hours. Tap clean the air filter element weekly on dusty job sites, and maintain the spark plug electrode gap at 0.030 inches. Order the Kohler CH680-3091 horizontal shaft engine from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.
Kohler Command Pro CH680-3091 Technical Specs
| Brand | Kohler |
| Full Model Code | CH680-3091 |
| Country of Origin | USA |
| Engine Orientation | Horizontal Shaft |
| Engine Type | 4-Stroke, OHV, V-Twin |
| Displacement | 674 cc |
| Bore x Stroke | 80 x 67 mm |
| Compression Ratio | 8.5:1 |
| Maximum Output | 16.8 kW (22.5 HP) @ 3600 RPM |
| Maximum Torque | 47.5 Nm (35.0 lbs-ft) @ 2400 RPM |
| Specific Fuel Consumption | 6.3 L/hr @ 3600 RPM |
| Fuel Induction System | Two-Barrel Carburetor (Heavy Duty Filter) |
| Ignition System | Electronic Ignition |
| Start System | Electric Start |
| Shaft Specification | 1-1/8" (28.5 mm) Straight Keyway Shaft |
| Fuel Tank Capacity | Data not released (External) |
| Oil Capacity & Type | 1.9 Liters / SAE 10W-30 |
| Cooling System | Air Cooled |
| Dry Weight | 41.5 kg |
| Dimensions | 355 x 441 x 490 mm |
| Standard Warranty | 3 Years |
| Primary Application | Industrial Chippers, Professional Turf Care, Mobile Generators |












Reviews
There are no reviews yet.