Briggs & Stratton 15C107-0019-F8 250cc Engine – 3/4in Shaft, Electric Start

Description

Displacing 250cc through an overhead valve chamber, the Briggs & Stratton 15C107-0019-F8 horizontal engine provides dependable cold-weather cranking and high rotational torque. Heavy snow blowers and utility augers demand consistent low-RPM power that stalls standard small-displacement utility engines. This 1150 Series engine features an electric starter and a cold-weather carburetor housing that prevents throttle plate icing during winter operations.

A precision-ground 3/4-inch output shaft couples straight into industrial gear reduction boxes and chain drive sprockets without custom shims. Splash lubrication coats the bottom end in a protective oil layer, stopping journal wear during long clearing contracts. The mechanical governor responds to load increases within fractions of a second, opening the throttle butterfly to maintain steady impeller speed in dense, wet snow.

Technical Specifications of Briggs & Stratton 15C107-0019-F8

• 250cc 4-Stroke OHV Engine: Produces 11.50 gross torque ft-lbs to power commercial snow and utility equipment through heavy drifts.
• 3/4-Inch Straight Keyed Shaft: Matches universal snow thrower drive pulleys, direct-drive couplings, and auger gearboxes.
• Push-Button Electric Starter: Plugs into 110V power outlets for effortless starting in sub-zero winter temperatures.
• Auxiliary Recoil Pull Mechanism: Provides a dependable manual starting method during remote field operations.
• Overhead Valve Cylinder Head: Runs cooler than side-valve designs, cutting fuel consumption and extending valve seat life.

Jobsite Performance & Wear Resistance

Designed for cold-climate utility and snow removal machinery, this 250cc horizontal engine delivers high rotational power in freezing environments.

• Cold-weather control knobs and large starter grip allow easy operator control with thick winter gloves.
• Overhead valve efficiency delivers clean fuel combustion to reduce carbon accumulation on valve faces.
• Municipal maintenance departments and snow removal contractors secure dependable equipment starts in deep winter freezes.
• Standard base bolt dimensions allow fast drop-in repower swaps without frame drilling or fabrication delays.

Target Machinery & Drop-In Fitment

Weighing 43 pounds dry with an industry-standard 4-bolt horizontal base pattern, this engine fits two-stage commercial snow throwers, winter utility tractors, portable generators, and agricultural sprayers without frame modification.

Commercial Warranty & Preventive Maintenance

• Commercial purchasers receive 2-Years of limited factory warranty coverage for industrial use.
• Consumer buyers receive 2-Years of comprehensive manufacturer warranty protection.

Drain engine oil after the initial 20 operating hours, then service every 100 hours with 5W-30 synthetic or 10W-30 oil. Check fuel lines annually for winter readiness, and maintain spark plug gaps at 0.030 inches. Order the Briggs & Stratton 15C107-0019-F8 horizontal shaft engine from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.