Used Vetus M3.10 22HP Marine Diesel Engine
Description
Used Vetus M3.10 22HP Marine Diesel Engine
Used Vetus M3.10 22hp Three Cylinder Heat Exchanger Cooled Marine Diesel Engine Complete With Gearbox, Control Panel, Wiring Loom & Flexible Mountings. This was removed during the repower of a catamaran and was originally attached to a Selva saildrive which was failing and parts unavailable to repair so the entire package was replaced. Our workshops have fitted the engine with original specification rear mountings, adaptor plate and Hurth HBW100 gearbox to convert the engine back to a standard shaft drive model.
Running hours are only 1400 from new and a new heat exchanger assembly was fitted only 50 running hours ago. Based on the well known Mitsubishi K series base engine, this would make a super engine for a sailing yacht or small launch repower. Fully tested and serviced at our workshops, ready for a new owner.
Manufacturer: Vetus
Year built: 1994
Power: 22
Motor: 16
Fuel: Diesel
Used Vetus M3.10 22HP Marine Diesel Engine Specs
| Brand | Vetus |
| Full Model Code | M3.10 (Mitsubishi L3E Base) |
| Country of Origin | Netherlands |
| Engine Family/Series | Vetus Low-Vibration M-Line |
| Engine Type & Configuration | Inline 3-Cylinder, 4-Stroke, Vertical Marine Diesel |
| Aspiration & Induction System | Naturally Aspirated, Indirect Injection with Vortex Swirl Combustor |
| Displacement | 0.952 Liters / 952 cc |
| Bore x Stroke | 76.0 mm x 70.0 mm |
| Cylinder Count & Valves per Cylinder | 3-Cylinder, 2-Valves per Cylinder (6 Valves Total) |
| Compression Ratio | 22.0:1 |
| Rated Power / Horsepower | 22 HP (16.2 kW) @ 3000 RPM |
| Maximum Engine Speed / Rated RPM | 3000 RPM |
| Maximum Torque | 52.5 Nm @ 2000 RPM |
| Fuel System & Injection Type] | Mechanical Bosch-Type In-line Miniature Fuel Injection Pump |
| Governor Type | Mechanical Governor with Fine Low-Idle Calibration |
| Electrical System Voltage & Alternator Output | 12V System, 75 Amp Alternator with Integrated Smart Regulator |
| Starting System | 12V Heavy Duty Starter Motor with Quick Preheat Engine Controls |
| Cooling System Type | Freshwater Cooling Matrix with Combined Exhaust Manifold and Heat Exchanger Unit |
| Lubricating Oil Capacity / Oil Pan Capacity | 3.6 Liters |
| Exhaust Diameter / Exhaust System Type | 40 mm / Waterjacketed Marine Wet Exhaust Mixing Elbow |
| Flywheel & Flywheel Housing Size | SAE 5 Flywheel Housing Standard Adaptability |
| Dry Weight without Marine Gear | 113 kg (249 lbs) |
| Dimensions L x W x H | 605 mm x 448 mm x 540 mm |
| Emission Certifications & Duty Rating | EU RCD 1, EPA Tier 2 Compliant / Continuous Auxiliary Cruising Rating |
| Application | Cruising yachts, pocket displacement trawlers, inland river canal boats, and wooden motor launches (Typical hull lengths 25-34 feet, running on traditional rigid shaft propulsion setups). |
You must be logged in to post a review.
Reviews
There are no reviews yet.