Used Lister Petter LPW2 Keel Cooled Marine Diesel Engine
$1,417.00
In Stock
Description
Used Lister Petter LPW2 18hp Twin Cylinder Keel Cooled Marine Diesel Engine Package With 1.8:1 Hurth Gearbox, Control Panel & Wiring Loom. Taken as a part exchange on a larger LPW3, this engine has been test run by our workshops and apart from needing a replacement alternator (which has now been fitted) was found to be in good order, starting well from cold and running smoothly. It has been serviced and painted and is now ready for use. Ideal for a small narrowboat.
Manufacturer: Lister Marine
Year built: 1993
No. of cylinders: 2
Cylinder capacity: 0.9
Starter: Electric start
Cooling type: Fresh water
Power: 18
Motor: 13
Fuel: Diesel
Used Lister Petter LPW2 Keel Cooled Specs
| Brand | Lister Petter |
| Full Model Code | LPW2 (Alpha Series) |
| Country of Origin | United Kingdom |
| Engine Family/Series | Alpha Series Compact Propulsion Line |
| Engine Type & Configuration | Inline 2-Cylinder, 4-Stroke, Ultra-Compact Marine Diesel |
| Aspiration & Induction System | Naturally Aspirated, Direct Injection |
| Displacement | 0.930 Liters / 930 cc |
| Bore x Stroke | 86.0 mm x 80.0 mm |
| Cylinder Count & Valves per Cylinder | 2-Cylinder, 2-Valves per Cylinder (4 Valves Total) |
| Compression Ratio | 18.5:1 |
| Rated Power / Horsepower | 18.9 HP (14.1 kW) @ 3000 RPM |
| Maximum Engine Speed / Rated RPM | 3000 RPM |
| Maximum Torque | 50.6 Nm @ 2000 RPM |
| Fuel System & Injection Type] | Individual Plunger Pumps, Self-Venting Mechanical Direct Injection |
| Governor Type | Mechanical Centrifugal All-Speed Governor |
| Electrical System Voltage & Alternator Output | 12V System, 45 Amp Belt-Driven Alternator |
| Starting System | 12V Heavy Duty Electric Starter with Integrated Heater Plugs |
| Cooling System Type | Closed Circuit Keel Cooling Layout (Engine-Driven Internal Circulation Pump) |
| Lubricating Oil Capacity / Oil Pan Capacity | 3.5 Liters |
| Exhaust Diameter / Exhaust System Type | 35 mm / Dry Marine Exhaust System Set |
| Flywheel & Flywheel Housing Size | SAE 5 Flywheel Housing Standard |
| Dry Weight without Marine Gear | 112 kg (247 lbs) |
| Dimensions L x W x H | 525 mm x 512 mm x 647 mm |
| Emission Certifications & Duty Rating | EU Stage 3A Regulated / Continuous Heavy Auxiliary Duty |
| Application | Small river narrowboats, wilderness canal flats, pocket sailing cruisers, and wooden harbor tenders (Typical hull lengths 20-32 feet, configured with shaft drive line). |
You must be logged in to post a review.
Reviews
There are no reviews yet.