Paguro 14000 Marine Generator

Description

Seeking heavy multi-stage marine chiller capacity? The Paguro 14000 Marine Generator delivers robust prime power engineered for offshore commercial vessels and motor yachts. Operating at a steady 3000 RPM or 3600 RPM speed, this generator supplies 12.0 kW continuous power and 14.0 kVA surge capacity at 120V and 240V 60Hz to power demanding marine galley and climate control loads.

Constructed inside a reinforced fiberglass sound shield, this unit features a three-cylinder 1028cc Lombardini diesel engine with direct water-jacket cooling. The synchronous alternator contains 100 percent copper windings that eliminate thermal hotspots under maximum continuous output. Weighing 463 lbs dry, the rigid assembly features exterior frame dimensions measuring 34.2 inches long by 22.0 inches wide by 26.8 inches high.

Key Features of Paguro 14000

Captains who buy Paguro 14000 marine generator units gain dependable fixed-speed electrical generation designed to withstand commercial maritime environments. Its direct freshwater cooling encompasses both engine block and alternator housings, transferring heat out through maritime wet exhaust systems.

• 12.0 kW continuous electrical output energizes onboard commercial refrigeration cases and ice machines without strain.
• 14.0 kVA surge capacity handles severe inductive starts from hydraulic power packs and heavy bilge pump motors.
• Direct water-cooled alternator jacket eliminates hot airflow into confined commercial vessel engine compartments.
• 14000 commercial auxiliary engine architecture incorporates cast-iron cylinder sleeves for thousands of operational hours.
• Synchronous motor operation delivers steady 60 Hz alternating current under constant heavy kitchen draws.
• Fiberglass sound capsule suppresses mechanical clatter to maintain quiet work conditions on deck.
• Dual-circuit cooling features stainless steel heat exchanger tubes that resist harsh marine saltwater erosion.
• Safety shutdown sensors stop fuel injection when exhaust temperatures exceed threshold limits or oil pressure drops.

Inductive Load Handling Acoustic Performance

Emitting 53 dB(A) at 23 feet inside its sealed sound enclosure, this diesel generator prevents hull resonance during crew rest shifts. An internal voltage regulation system holds voltage drop within 2 percent during full compressor load steps, maintaining 60 Hz power across marine induction stoves and commercial vessel freezers. Consuming 0.82 GPH of diesel at 50 percent load, the engine maintains high fuel economy during long offshore commercial passages.

Exhaust Plumbing Seacock Hull Fitment

Install this generator on level stringers at least 15 inches above bilge water lines, leaving 12 inches of service clearance around capsule panels. Connect raw water supply through a dedicated bronze seacock with an inline sea strainer. Grounding circuits link to vessel bonding buses through isolated ground returns to prevent galvanic zinc loss.

Marine Usability Periodic Service Protocols

Quick-release rubber latches allow rapid capsule panel removal to inspect oil level and fuel priming bulbs. This fixed-speed generator is not engineered for dry land operation without raw seawater cooling, nor for high-frequency telecommunications equipment requiring pure sine wave harmonic distortion under 1 percent.

• Inspect sea strainer baskets and raw-water pump drive belts before each shift.
• Renew engine oil and replace primary fuel filters every 100 runtime hours.
• Inspect zinc anodes and check alternator insulation resistance every 250 runtime hours.

Marine Guarantee Factory Crate Inventory

Paguro includes a 2-Year limited warranty protecting mechanical engine parts, cooling heat exchangers, and electrical alternator stators. The delivery shipment contains the Paguro 14000 core, remote start panel, external fuel pump, oil drain system, anti-vibration mount set, and factory pre-delivery inspection documentation.