EcoFlow Rigid 400W Solar Panel

Description

During intensive commercial off grid solar collections, the EcoFlow Rigid Solar Panel Pair provides 800W combined photovoltaic output to replenish commercial power stations and battery banks. Featuring high-efficiency monocrystalline silicon cells, each 400W panel operates at 23 percent conversion efficiency. It provides dependable emission-free recharging for mobile food trucks and emergency command trailers without fuel consumption.

Anodized aluminum alloy framing encases the tempered glass face to withstand severe 130-mph jobsite wind loads and heavy snow accumulation. High-purity monocrystalline silicon cells are laminated behind anti-reflective glass for prolonged field endurance. Total weight per panel measures 48 lbs across outer frame dimensions of 67.8 inches long by 44.6 inches wide by 1.4 inches high. This EcoFlow rigid solar module features low-resistance internal copper bus ribbons that maintain high current flow under elevated temperatures.

Key Features of EcoFlow Rigid 400W

Solar fleet contractors buy EcoFlow Rigid 400W commercial power equipment to build permanent rooftop charging arrays on commercial service vans and concession trailers. Standard MC4 waterproof connectors allow series or parallel wiring into high-voltage solar charge controllers.

• 400W individual panel output delivers 800W combined peak generation under direct sun exposure.
• 23 percent cell conversion efficiency maximizes watt-hour harvest within tight vehicle roof spaces.
• IP68 waterproof rating protects electrical junction boxes against driving rain and high-pressure washdowns.
• Pre-drilled mounting holes along the aluminum frame speed up mechanical attachment to van roof racks.
• Standard MC4 output cables connect this Rigid 400W solar panel straight to commercial charge controllers.
• Bypass diodes isolate shaded cell strings to prevent localized hot spots and module power loss.
• Heavy tempered front glass resists impact damage from road gravel and falling tree branches.

Photovoltaic Current Output Thermal Characteristics

Each panel in this Rigid 400W solar panel pair produces an open-circuit voltage of 37.1V and an operational current of 13.79A under standard test conditions. High-efficiency bypass diodes protect cell rows against thermal puncture during partial shading from roof air conditioners. The low temperature coefficient limits voltage degradation on hot summer roofs, delivering dependable DC charging current straight into commercial solar generators to sustain food truck refrigeration circuits.

Structural Mounting Array Placement Rules

Fasten panels to structural roof struts maintaining at least 2 inches of airflow clearance beneath the rear backsheet to dissipate radiant solar heat. Orient panels toward southern exposures without physical obstructions from rooftop exhaust vents. Route output wiring through weather-tight cable entry plates using UV-resistant 10-gauge PV conductors terminated with genuine MC4 connectors.

Field Handling Inspection Negative Filtration

Rigid perimeter framing allows secure handling by two installers during roof positioning, preventing cell micro-cracking caused by torsional bending. These rigid panels are NOT engineered for walking surfaces, portable ground deployment without ballasted mounts, or immersion in flood water.

• Inspect front glass surfaces for dust accumulation and clean every 50 runtime hours.
• Check frame grounding lugs and bonding wires for mechanical tightness every 100 runtime hours.
• Inspect MC4 connection seals for moisture ingress every 250 runtime hours.

Manufacturer Warranty Shipping Package Inventory

This EcoFlow rigid solar module pair comes backed by a 5-Year commercial product warranty and a 25-Year linear power output warranty. The reinforced shipping crate contains two 400W rigid solar panels, integrated MC4 connection leads, mounting bracket hardware, and factory performance test sheets.