Miller Multimatic 255 Process Welder – 20-350A Amp Range, P/N 951768

Description

Displacing 350 amps of pulsed wire-feed power, the Miller Multimatic 255 process welder package (P/N 951768) provides a complete mobile MIG production station with an EZ-Latch running gear cart. Rolling heavy industrial powerheads and shielding gas bottles between fabrication bays causes severe operator back strain without dedicated running gear. This complete package bundles the 350-amp multi-process inverter with an EZ-Latch running gear cart, an MDX-250 MIG gun, dual-groove drive rolls, and an industrial gas regulator.

The EZ-Latch running gear unlatches from the powerhead in seconds without tools, allowing crews to separate the cart and lift the 84-pound welder into truck beds for remote field repairs. Auto-Set Elite technology configures optimal arc voltage and wire feed speed across various material thicknesses, while the heavy-duty wire drive feeds 0.035-inch to 0.045-inch wire up to 700 IPM. The heavy-duty cart carries a full-size shielding gas cylinder and features an under-deck storage drawer that holds spare contact tips and nozzles.

Technical Specifications of Miller Multimatic 255 (P/N 951768)

• Complete Mobile EZ-Latch Package: Bundles Multimatic 255, EZ-Latch cart, MDX-250 gun, drive rolls, and gas flowmeter.
• 20-350A Multi-Process Output Window: Fuses thin sheet metal up to 1/2-inch structural carbon steel plate.
• Integrated Pulsed MIG Technology: Produces clean, spatter-free weld beads on carbon steel, stainless, and aluminum.
• Tool-Free EZ-Latch Running Gear: Latches and unlatches the powerhead from the cart base in seconds for mobile field transport.
• Full-Size 12-Inch Wire Spool Hub: Accepts 33-pound industrial wire spools to lower wire costs and extend production time.

Fabrication Stamina & Inverter Reliability

Designed for structural steel fabricators and production welding bays, this mobile MIG package delivers high wire deposition with zero spatter.

• EZ-Latch cart system allows one worker to separate the power source from the cart base, easing truck bed loading without cranes.
• Pulsed MIG waveforms produce flat weld beads with zero spatter, slashing post-weld grinding and chipping hammer hours.
• Large 12-inch spool capability cuts wire cost per pound substantially compared to purchasing small 8-inch spools.
• Heavy cast-aluminum drive mechanism feeds solid and tubular wire with consistent tension across full spools.

Chassis Compatibility & Transport Dimensions

The cart base measures 40 inches long by 26 inches wide on its running gear cart, rolling over shop floor grates on large industrial rubber tires.

Commercial Warranty & Preventive Maintenance

• Miller Electric backs the Multimatic 255 power source and EZ-Latch cart with a 3-Year True Blue warranty.
• The MDX-250 MIG gun and gas flowmeter receive 1-Year manufacturer warranty protection.

Change drive rolls according to wire size and type, clean the brass gas diffuser monthly, and blow accumulated steel grinding dust from the internal fan tunnels. Order the Miller Multimatic 255 process welder from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.