Miller Deltaweld 500 MIG Welder – P/N 951819

Description

Structural fabrication shops using the Miller Deltaweld 500 MIG welder (P/N 951819) eliminate wire spool changeover downtime through a dual-feeder running gear package. Operators lose productive hours swapping between solid steel wire and cored structural wire when using single-feeder welding stations on mixed fabrication jobs. This complete package includes the 500-amp Deltaweld power source, an Intellx Pro dual-wire feeder, two Bernard MIG guns, and a heavy four-wheel cylinder running gear cart.

Dual wire drives allow welders to keep solid steel wire on one side and flux-cored or stainless wire on the other, toggling between guns with a pull of the trigger. The Intellx Pro wire feeder features ArcControl and pulsed MIG programs, depositing flat, spatter-free beads on heavy assemblies without grinding cleanup. The heavy-duty cart holds the power source, dual-wire feeder, and two full-size shielding gas cylinders, keeping both gas lines connected simultaneously.

Core Mechanical Specifications of Miller Deltaweld 500 (P/N 951819)

• Intellx Pro Dual-Wire Feeder System: Holds two separate wire spools with independent guns to switch processes without wire changeovers.
• 500A Industrial Output at 100% Duty Cycle: Runs all day on heavy structural fabrication passes without thermal overload stops.
• Two Bernard BTB MIG Guns Included: Keeps two dedicated torches plumbed for separate wire diameters or metal alloys.
• Pulsed MIG & ArcControl Software: Slashes post-weld cleanup labor by producing flat weld beads with minimal spatter.
• Dual Gas Cylinder Running Gear: Carries two full-size shielding gas bottles with secure rear chain latches.
• Auto-Line Three-Phase Power Integration: Operates on 230V or 460V industrial plant drops without internal jumper adjustments.
• Wind Tunnel Technology Cooling: Protects internal circuit boards from airborne metal shavings by directing air through a central duct.

Production Efficiency & Reduced Post-Weld Cleanup

This dual-feeder commercial MIG station doubles fabrication versatility and eliminates non-productive spool changeover delays.

• Dual-gun capability allows operators to tack parts with solid wire and finish heavy structural joints with flux-cored wire in seconds.
• Pulsed MIG waveforms produce flat weld beads with zero spatter, slashing post-weld grinding and chipping hammer hours.

Material Capacities & Workshop Integration

The cart base measures 42 inches long by 28 inches wide, creating a mobile workstation that positions the dual-wire feeder at natural operator height for fast adjustments.

Factory Warranty Terms & Consumable Care

• Miller Electric covers the Deltaweld 500 power source and Intellx Pro dual feeder with a 3-Year True Blue warranty.

Blow metal grinding dust out of the cooling louvers monthly, inspect drive roll alignment pins on both feeders, and replace contact tips when arc stability drifts. Order the Miller Deltaweld 500 MIG welder (P/N 951819) from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.