Kohler CH680-3016 22.5HP 674cc V-Twin Engine – 1in Shaft, Electric Start

SKU: KOH-CH680-3016
In Stock

Kohler CH680-3016 carries 22.5 horsepower. A 674cc block backs up the output, and torque peaks at 47.5 Nm. Electric Start gets it running without a fuss. The 1in shaft fits standard mounts.

  • Rated for 22.5 horsepower output
  • Displacement comes in at 674cc
  • Twists out 47.5 Newton-meters under load
  • A 1in horizontal shaft, standard mount
  • Key-start ignition, no yanking required
$1,119.00
In Stock
Add to wishlist
Category: Brand:
Worldwide Shipping
Orders processed within 48h

Description

Service truck mechanics relying on the Kohler CH680-3016 horizontal engine eliminate compressor stalls and low-voltage starting issues on mobile repair skids. Commercial service trucks put severe continuous resistance on engine drive shafts when running heavy two-stage air compressors during roadside equipment overhauls. Kohler equips this 674cc 22.5HP Command PRO engine with a precision-ground 1-inch output shaft, full-pressure lubrication, and an onboard 12V electric starter.

An internal oil pump circulates pressurized motor oil to critical crankshaft journal inserts, while an auxiliary oil cooler lowers fluid temperatures during hot summer service calls. The 1-inch horizontal shaft handles heavy compressor pump pulleys and direct drive couplings without lateral deflection. The heavy-duty commercial air cleaner prevents roadside silica grit and exhaust soot from eroding the intake valve seat, preserving engine compression year after year.

Core Mechanical Specifications of Kohler CH680-3016

  • 674cc 22.5HP Commercial V-Twin Engine: Supplies high rotational torque to drive heavy two-stage reciprocating air compressors.
  • 1-Inch Keyed Horizontal PTO Shaft: Matches universal compressor pump pulleys, centrifugal clutches, and multi-groove sheaves.
  • Full-Pressure Lubrication with Spin-On Filter: Pumps filtered oil continuously to crankshaft journal inserts and rod bearings.
  • Hydraulic Valve Lifters: Automatically maintain zero valve clearance, eliminating periodic valve lash maintenance.
  • 12-Volt Solenoid Shift Electric Starter: Turns the flywheel ring gear with key activation to eliminate manual starting effort.
  • Durable Cast-Iron Cylinder Sleeves: Resists bore wear from abrasive dirt, extending engine life in severe commercial service.
  • Heavy-Duty Oil Cooler Assembly: Lowers operating oil temperatures to extend bearing life during continuous roadside compressor service.

Contractor Benefits & Long-Term Reliability

This electric-start V-twin engine combines high electrical charging capacity with rugged mechanical internals to keep service mechanics productive.

  • A reinforced crankcase base casting absorbs vibrational harmonics from continuous reciprocating compressor cycles.
  • Hydraulic valve lifters slash maintenance overhead by eliminating manual valve lash service appointments.

Machinery Compatibility & Chassis Mounting

Weighing 90 pounds dry with an industry-standard 4-bolt horizontal mounting base and 1-inch shaft, this motor powers service truck air compressors, hydraulic power packs, portable generators, and high-GPM trash pumps without frame alterations.

Factory Warranty Terms & Service Guidelines

  • Kohler backs this Command PRO engine with 3-Year limited warranty coverage for commercial and consumer service.

Field maintenance includes checking oil levels before each morning shift, changing oil and filter every 100 hours with 10W-30 oil, inspecting the air filter cartridge, and setting spark plug electrode gap to 0.030 inches. Order the Kohler CH680-3016 horizontal shaft engine from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.

Kohler Command Pro CH680-3016 Technical Specs

BrandKohler
Full Model CodeCH680-3016
Country of OriginUSA
Engine OrientationHorizontal Shaft
Engine Type4-Stroke, OHV, V-Twin
Displacement674 cc
Bore x Stroke80 x 67 mm
Compression Ratio8.5:1
Maximum Output16.8 kW (22.5 HP) @ 3600 RPM
Maximum Torque47.5 Nm (35.0 lbs-ft) @ 2400 RPM
Specific Fuel Consumption6.3 L/hr @ 3600 RPM
Fuel Induction SystemTwo-Barrel Carburetor
Ignition SystemElectronic Ignition
Start SystemElectric Start
Shaft Specification1" (25.4 mm) Straight Keyway Shaft
Fuel Tank CapacityData not released (External)
Oil Capacity & Type1.9 Liters / SAE 10W-30
Cooling SystemAir Cooled
Dry Weight41.0 kg
Dimensions355 x 441 x 490 mm
Standard Warranty3 Years
Primary ApplicationLarge Wood Chippers, Material Handling, Professional Power Washers

Reviews

There are no reviews yet.

Be the first to review “Kohler CH680-3016 22.5HP 674cc V-Twin Engine – 1in Shaft, Electric Start”

Your email address will not be published. Required fields are marked *

Log in

You dont have an account yet? Register Now

Search

Categories

Your Cart