Kohler CH270-3019 7HP 208cc Engine – 3/4in Shaft
No guesswork, Kohler CH270-3019 sends 7 horsepower to the shaft. A 208cc block backs up the output, and torque peaks at 13.8 Nm. Recoil Start gets it running without a fuss.
- Produces 7 horsepower at rated load
- The 208cc block handles the load
- Pulls 13.8 Nm of torque at peak
- Shaft measures 3/4in, horizontal configuration
- Simple pull-cord start, nothing to charge
Description
During continuous 8-hour concrete mixing shifts, the Kohler CH270-3019 horizontal engine maintains steady rotational torque without carburetor surging or stalling under load. Small utility tools on construction sites take severe beatings from falling aggregate, heavy vibration, and rough transport. Kohler equips this 208cc 7HP Command PRO engine with a heavy-duty steel fuel tank, a precision-ground 3/4-inch output shaft, and cast-iron cylinder liners engineered to survive rental yard abuse.
An internal oil slinger distributes lubrication over the cylinder wall and camshaft gears, keeping friction low under heavy continuous operation. The 3/4-inch keyed drive shaft handles direct-drive pump couplers and belt sheaves without shaft deflection. The industrial carburetor features calibrated fuel passages that resist ethanol gumming, ensuring smooth engine idling between concrete batches.
Technical Features of Kohler CH270-3019
- 208cc 7HP Commercial OHV Powerhead: Supplies 7 gross horsepower for portable cement mixers and small contractor tools.
- 3/4-Inch Keyed Horizontal PTO Shaft: Standard commercial diameter matches direct-drive pump couplings, clutches, and pulleys.
- Quad-Clean Cyclonic Air Cleaner: Traps fine dust particles across four filtration stages to preserve cylinder wall compression.
- Oil Sentry Ignition Cutoff: Halts ignition current if sump oil levels drop below minimum line to protect rod bearings.
- All-Steel Fuel Tank Assembly: Mounts securely to the engine block with an internal sediment screen to filter incoming gasoline.
Heavy-Duty Architecture & Low Maintenance
Designed for demanding commercial service, this 3/4-inch shaft horizontal engine provides steady power output with minimal field maintenance requirements.
- A rigid aluminum crankcase casting and precision-machined shaft journals resist side-load belt stress under high tension.
- Overhead valve efficiency delivers clean fuel combustion to reduce carbon accumulation on valve faces.
- Masonry contractors and equipment rental yards secure dependable machine uptime across long operating seasons.
Equipment Integration & Fitment Specs
Weighing 38.7 pounds dry with a universal 4-bolt horizontal mounting base and 3/4-inch shaft, this motor repowers portable cement mixers, agricultural chemical sprayers, pressure washers, and centrifugal dewatering pumps.
Commercial Coverage & Maintenance Upkeep
- Factory warranty terms provide 3-Year commercial and consumer coverage on all core mechanical assemblies.
Service this engine with fresh 10W-30 motor oil every 100 operating hours. Tap clean the air filter element weekly on dusty job sites, and maintain the spark plug electrode gap at 0.030 inches. Order the Kohler CH270-3019 horizontal shaft engine from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.
Kohler Command Pro CH270-3019 Technical Specs
| Brand | Kohler |
| Full Model Code | CH270-3019 |
| Country of Origin | USA/Global |
| Engine Orientation | Horizontal Shaft |
| Engine Type | 4-Stroke, OHV, Single Cylinder |
| Displacement | 208 cc |
| Bore x Stroke | 70 x 54 mm |
| Compression Ratio | 8.5:1 |
| Maximum Output | 5.2 kW (7 HP) @ 3600 RPM |
| Maximum Torque | 13.8 Nm (10.2 lbs-ft) @ 3000 RPM |
| Specific Fuel Consumption | 1.6 L/hr @ 3600 RPM |
| Fuel Induction System | Carburetor (Standard Filtration) |
| Ignition System | Electronic Ignition |
| Start System | Recoil Start |
| Shaft Specification | 3/4" (19.05 mm) Straight Keyway Shaft |
| Fuel Tank Capacity | 4.0 Liters |
| Oil Capacity & Type | 0.6 Liters / SAE 10W-30 |
| Cooling System | Air Cooled |
| Dry Weight | 17.5 kg |
| Dimensions | 323 x 385 x 361 mm |
| Standard Warranty | 3 Years |
| Primary Application | Log Splitters, Utility Gear, Industrial Pumps |












Reviews
There are no reviews yet.