Used Beta Marine 50HP Marine Diesel Engine

SKU: USED-BETA-50HP
In Stock
$3,967.00
In Stock
Add to wishlist
Category: Brand:
Shipping 2 Days
All orders are processed and dispatched within 2 days

Description

Used Beta Marine 50HP Marine Diesel Engine

Used Beta Marine 50hp Four Cylinder Naturally Aspirated Heat Exchanger Cooled Marine Diesel Engine Package With TMC60 Gearbox, Engine Mounts, Control Panel and Extension Loom. This engine was manufactured in October 2019 and was installed very recently. The day the vessel was launched following installation, she suffered a serious leak from a faulty seacock. She was motored to her berth from the hoist dock and tied up. Very soon after, the leak was noticed and that she was sinking so she was towed straight back to the hoist but the engine was partially immersed by this time she was lifted.

The engine was immediately removed and was then sent to an authorised Beta Marine dealer who fully stripped the engine to check for water ingress including removal of the cylinder head, pistons and crankshaft. Everything was meticulously cleaned, oiled and refitted with the whole engine reassembled with new gaskets and seals., All electrical components including engine wiring harness, starter, alternator and senders were all replaced with brand new units. The TMC60 gearbox was also fully stripped, cleaned and reassembled in the same way as the engine.

It was test run for an extended period following reassembly and found to be good as new with just some paintwork touching up required. The engine only ran for 15 minutes since being installed and then a few hours on a test bed so having now been fully stripped, cleaned and inspected it is essentially as a new unit would be.

Manufacturer: Beta Marine
Year built: 2019
No. of cylinders: 4
Cylinder capacity: 2.2
Starter: Electric start
Cooling type: Fresh water
Sale: Trade
Power: 50
Motor: 37
Fuel: Diesel

Used Beta Marine 50HP Specs

BrandBeta Marine
Full Model CodeBeta 50 (Kubota V2197 Base)
Country of OriginUnited Kingdom
Engine Family/SeriesBeta Marine Propulsion Series
Engine Type & ConfigurationInline 4-Cylinder, 4-Stroke, Vertical Marine Diesel
Aspiration & Induction SystemNaturally Aspirated, Spherical Three Vortex Combustion System (E-TVCS)
Displacement2.197 Liters / 2197 cc
Bore x Stroke87.0 mm x 92.4 mm
Cylinder Count & Valves per Cylinder4-Cylinder, 2-Valves per Cylinder (8 Valves Total)
Compression Ratio23.0:1
Rated Power / Horsepower50 HP (37.3 kW) @ 2800 RPM
Maximum Engine Speed / Rated RPM2800 RPM
Maximum Torque145 Nm @ 1800 RPM
Fuel System & Injection Type]Mechanical Bosch-Type In-line Injection Pump, Indirect Injection
Governor TypeMechanical Centrifugal Governor
Electrical System Voltage & Alternator Output12V System, 70 Amp Heavy Duty Alternator (Optional 120A/175A or 24V)
Starting System12V Electric Starter Motor
Cooling System TypeFreshwater Cooling via Heat Exchanger with Cupro-Nickel Tube Stack
Lubricating Oil Capacity / Oil Pan Capacity9.5 Liters
Exhaust Diameter / Exhaust System Type50 mm / Water-Injected Wet Exhaust Elbow
Flywheel & Flywheel Housing SizeSAE 5 Flywheel Housing / SAE 7.5 Flywheel
Dry Weight without Marine Gear249 kg (548 lbs)
Dimensions L x W x H856 mm x 484 mm x 642 mm (Typical with TMC60 Gearbox)
Emission Certifications & Duty RatingRCD 2 (2013/53/EU), EPA Tier 3 Compliant / Recreational & Light Commercial Duty
ApplicationDisplacement monohull sailboats, cruising yachts, heavy river narrowboats (Typical hull lengths 40-45 feet, 12-15 tons displacement) utilizing shaft drive system.

Reviews

There are no reviews yet.

Be the first to review “Used Beta Marine 50HP Marine Diesel Engine”

You may also like…

Log in

You dont have an account yet? Register Now

Search

Your Cart