Tohatsu MFS30DL 30HP Outboard – 20in Shaft
Built simple, Tohatsu MFS30DL packs 30 horsepower. A 20-inch shaft rounds out the rigging. It keeps the rigging simple for first-time outboard buyers. It trims down the guesswork when matching motor to hull.
- 30 horsepower, ready to run
- 20-inch shaft, standard fit
- Backed by standard marine warranty
- 20-inch shaft for most transoms
- Rated at 30 horsepower
Description
Commercial river operators operating miles from civilization trust the manual-start Tohatsu MFS30DL to deliver absolute battery-free EFI reliability. The 500cc inline-three block atomizes fuel flawlessly using internal magnetic power, pushing heavily loaded aluminum workboats upstream against strong river currents effortlessly. Verifying your exact transom geometry ensures this 30 hp long shaft tiller outboard fits securely without causing excessive hydrodynamic drag on the lower unit.
Clear submerged rocky obstacles safely in shallow creeks by utilizing the six-position manual tilt bracket as a direct physical lifting aid. You grab the rear cowl grip to pull the 58 kg gearcase upward instantly to prevent devastating impacts. Tohatsu casts the lower unit housing using multi-stage anti-corrosion treatments. This structural barrier stops galvanic decay when repowering tall transom utility boats in brackish coastal environments.
Key Features of Tohatsu MFS30DL
- Battery-Less EFI: Atomizes fuel perfectly using internal magnetic power, guaranteeing reliable cold-weather pull starts without requiring a 12-volt battery.
- 20-Inch Long Shaft: Places the anti-ventilation plate deeply beneath tall utility transoms, preventing water pump starvation in heavy chop.
- Manual Recoil Starting: Strips heavy starter motors and battery cables completely from your boat, maximizing available gear payload capacity.
- Multi-Function Tiller Handle: Concentrates shift and throttle inputs directly into your operating hand for immediate physical obstacle avoidance.
- Manual Tilt Bracket: Features a rigid mechanical lock, safely holding the gearcase out of the water physically while moored at the dock.
- 17-Amp Charging Alternator: Outputs constant electrical current while running, keeping small deep cycle batteries topped off for fish finders.
- 500cc Inline-Three Block: Produces massive low-end torque internally, lifting heavy aluminum work boats onto plane much faster.
- 2.17:1 Gear Ratio: Multiplies engine torque effectively, translating the 500cc displacement into relentless pushing force for loaded skiffs.
- Accessible Oil Drain: Simplifies routine crankcase lubrication changes, saving significant time during seasonal maintenance prep without specialized tools.
- Clean Four-Stroke Combustion: Burns unleaded fuel highly efficiently without messy two-stroke oil mixing, keeping pristine anchorages completely free of surface oil slicks.
Why Choose Tohatsu MFS30DL
This specific build fits only 20-inch transoms requiring direct physical tiller control. The extended shaft creates massive drag if mounted on a standard 15-inch boat. You cannot wire this to a forward console steering wheel. Procuring a reliable manual start long shaft outboard secures off-grid pushing power.
- Confirm a 20-inch vertical measurement from the transom top to the keel.
- Verify the tiller handle sweep path clears your rear bench seating completely.
- Avoid oil slicks on the water utilizing modern four-stroke internal lubrication.
Ideal Application and Vessel Fitment
This 20-inch manual-start tiller engine is engineered specifically for tall-transom aluminum work skiffs, heavy fiberglass camp boats, and commercial river-running hulls demanding high thrust in a portable package. By stripping away heavy electric starter motors and utilizing battery-less EFI, operators gain maximum payload capacity for remote area fishing gear. The advanced fuel injection guarantees this reliable manual start tiller outboard fires instantly in freezing weather, making it the definitive off-grid power plant for rugged backcountry exploration.
Warranty, Support and Maintenance
Authorized recreational operation receives a 5-Year Limited Warranty alongside exceptional factory support. Registered commercial applications fall under a strict 1-Year Limited Warranty with zero corrosion coverage applied to the block. Scheduled maintenance requires replacing gearcase lubricants and changing oil filters at manual-specified intervals. Always save all physical service records. Your engine serial number acts as the only way to source exact genuine replacement parts. Mulmotor provides product-information support before purchase and assistance with order-related questions.
Tohatsu 30HP MFS30DL Specs
| Brand | Tohatsu |
| Full Model Code | MFS30DL (Aqua Marine Blue) |
| Country of Origin | Japan |
| Engine Family/Series | MFS FourStroke (New Gen) |
| Engine Type | Inline 3 / 4-Stroke |
| Displacement | 0.50 Liters (500 cc) |
| Horsepower | 30 HP @ 6000 RPM |
| Full Throttle RPM Range | 5500 - 6100 RPM |
| Fuel Induction System | Battery-Less Electronic Fuel Injection (EFI) |
| Alternator Output | 17 Amps |
| Gear Ratio | 2.17:1 |
| Shaft Length | 20" (Long) |
| Dry Weight | 58 kg (128 lbs) |
| Bore x Stroke | 61 x 57 mm |
| Starting & Steering System | Manual Start w/ Multi-Function Tiller |
| Trim/Tilt Method | Manual Tilt |
| Oil Capacity | 1.8L |
| Recommended Fuel | 87 Octane |
| Standard Warranty | 5-Year Limited |
| Application | The ultimate lightweight, battery-independent 30HP for long-transom utility boats. |












Reviews
There are no reviews yet.