Tohatsu MFS30CWETL 30HP Outboard – 20in Shaft
Straight talk: Tohatsu MFS30CWETL answers with 30 horsepower. Transom height calls for the 20-inch shaft. Beluga White finish stands up to marine use. Boaters pick it for a straightforward, low-maintenance setup.
- Rated at 30 horsepower
- 20-inch shaft, standard fit
- Clean Beluga White marine-grade finish
- Balanced power-to-weight for its class
- Straightforward to service and maintain
Description
Premium luxury yacht tenders achieve unmatched aesthetics and thrust once the white Tohatsu MFS30CWETL hits the transom. The 500cc inline-three block utilizes advanced battery-less EFI to atomize fuel perfectly, pushing heavy pontoon logs efficiently against strong coastal currents. Verifying your exact transom height guarantees this white 30hp remote steer outboard mounts safely without creating excessive lower unit hydrodynamic drag.
Optimize your running attitude dynamically in rough chop by engaging the integrated hydraulic power trim system from the console. You tuck the 66 kg engine inward to push the bow down fast and slice through heavy offshore swells safely. Engineers cast the midsection using the exclusive Beluga White marine paint finish. This structural barrier prevents severe cosmetic sun damage completely when repowering premium multi-species boats in high-salinity coastal environments.
Key Features of Tohatsu MFS30CWETL
- Beluga White Finish: Reflects intense ultraviolet sunlight physically, preventing cosmetic fading and matching modern fiberglass hull finishes perfectly.
- Hydraulic Power Trim: Adjusts the running angle dynamically via a console switch, optimizing hull attitude instantly during rough water crossings.
- Remote Steering Bracketry: Accepts standard mechanical cables directly from your forward helm, integrating flawlessly for precise directional control.
- 20-Inch Long Shaft: Lowers the propeller below turbulent surface water on high transoms, maximizing forward thrust and preventing severe ventilation.
- Battery-Less EFI System: Meters exact gas ratios into the cylinders, completely eliminating carburetor jet clogging and throttle hesitation across the RPM band.
- 500cc Inline-Three Engine: Breathes clean air efficiently to produce massive low-end torque, lifting heavy fiberglass runabouts onto plane much faster.
- 17-Amp Charging Alternator: Replenishes electrical drain from navigation lights and marine radios continuously, guaranteeing your starting battery remains fully charged.
- Turn-Key Electric Start: Ignites the block instantly via your forward ignition switch, providing car-like starting reliability in freezing weather.
- 2.17:1 Gear Ratio: Multiplies engine torque massively, allowing small pontoons to carry heavier passenger loads without bogging down.
- Anti-Corrosion Castings: Blocks severe galvanic decay physically, protecting the aluminum powerhead block across decades of daily saltwater exposure.
Why Choose Tohatsu MFS30CWETL
Choosing this specific engine limits installation entirely to 20-inch tall transoms rigged with forward steering wheels and throttle boxes. You cannot bolt this onto a tiller-steered skiff. Correcting helm geometry is a key step when finding a white 20 inch shaft outboard replacement.
- Measure the vertical distance from your top transom edge to the keel bottom.
- Install corresponding mechanical control cables sized exactly for your specific boat length.
- Keep local lakes clean by running highly regulated four-stroke engine configurations.
Ideal Application and Vessel Fitment
This 20-inch remote-steered outboard excels on luxury yacht tenders, white fiberglass skiffs, and compact side-console pontoon logs where aesthetics matter just as much as performance. By connecting directly to a forward helm station, it shifts the operator weight forward, drastically improving the vessel running attitude. The 20-inch shaft guarantees the water pump remains deeply submerged on tall transoms, providing a stylish, reliable propulsion solution for recreational boaters needing a white remote steer outboard motor.
Warranty, Support and Maintenance
Authorized recreational operation receives a 5-Year Limited Warranty alongside exceptional factory support. Registered commercial applications fall under a strict 1-Year Limited Warranty with zero corrosion coverage applied to the block. Scheduled maintenance requires replacing gearcase lubricants and changing oil filters at manual-specified intervals. Always save all physical service records. Your engine serial number acts as the only way to source exact genuine replacement parts. For product details and order support, Mulmotor offers assistance before your purchase is placed.
Tohatsu MFS30CWETL Specs
| Brand | Tohatsu |
| Full Model Code | MFS30CWETL (Beluga White) |
| Country of Origin | Japan |
| Engine Family/Series | MFS25/30C Series |
| Engine Type | 3-Cylinder SOHC, 4-Stroke |
| Displacement | 0.50 Liters (500 cc) |
| Horsepower | 30 HP (22.1 kW) |
| Full Throttle RPM Range | 5000 - 6000 RPM |
| Fuel Induction System | Battery-Less Electronic Fuel Injection |
| Alternator Output | 17 Amps |
| Gear Ratio | 2.17:1 |
| Shaft Length | L: 508 mm (20 in) |
| Dry Weight | 66 kg (145 lbs) |
| Bore x Stroke | 61 x 57 mm |
| Starting & Steering System | Electric Start & Remote Control |
| Trim/Tilt Method | Power Trim and Tilt |
| Oil Capacity | 1.7 Liters |
| Recommended Fuel | 87 Octane |
| Standard Warranty | 5-Year Limited Warranty |
| Application | Luxury Yacht Tenders, White Fiberglass Skiffs, Pontoons |












Reviews
There are no reviews yet.