Tohatsu BFT150AXCA 150HP Outboard – 25in Shaft, Counter Rotation

Description

Port-side steering pull on dual-engine setups vanishes when the Tohatsu BFT150AXCA actively balances lateral propeller torque. Drawing from a massive 2354cc displacement, this VTEC-equipped inline-four delivers synchronized holeshot power to push heavy fiberglass catamarans through choppy inlets. Verifying your twin-engine bracket guarantees this counter rotating 150hp outboard motor aligns perfectly with your starboard drive.

Eliminate extreme steering fatigue at high offshore cruising speeds by utilizing the counter-rotating gearcase to cancel starboard thrust pull mechanically. You pilot massive twin-engine rigs with single-finger precision through violent offshore chop. Tohatsu coats the 220 kg gearcase with advanced multi-stage marine primers. This physical barrier stops galvanic blistering across decades of exposure when repowering twin engine offshore setups for daily coastal use.

Key Features of Tohatsu BFT150AXCA

• Counter-Rotating Gearcase: Cancels the massive lateral thrust of a standard engine, keeping twin-engine performance hulls tracking perfectly straight underway.
• 25-Inch Extra-Long Shaft: Reaches deep below elevated sailboat auxiliary brackets and offshore transoms, keeping the propeller fully engaged in steep swells.
• VTEC Valve Timing: Shifts camshaft profiles electronically at higher RPMs, delivering explosive midrange acceleration to match your starboard engine perfectly.
• Programmed EFI System: Calculates precise fuel requirements continuously, eliminating carburetor hesitation and ensuring crisp acceleration across the 5000-6000 RPM band.
• 55-Amp Charging Alternator: Outputs unmatched electrical current continuously, keeping premium gyro-stabilizers and large chartplotter arrays fully powered offshore.
• Remote Mechanical Steering: Accepts standard mechanical cables directly from your forward helm, integrating flawlessly for precise directional control.
• Heavy-Duty Power Trim: Lifts the bow out of the water cleanly, drastically reducing hull friction during high-speed tournament fishing runs.
• 2.14:1 Gear Ratio: Transfers massive inline-four torque to the propeller shaft securely, turning large diameter stainless props without slipping.
• Corrosion-Resistant Castings: Blocks severe galvanic decay physically, protecting the lower unit across decades of daily saltwater exposure.
• Clean Four-Stroke Combustion: Burns fuel highly efficiently without oil mixing, easily meeting strict local waterway emissions regulations and EPA standards.

Why Choose Tohatsu BFT150AXCA

This exact counter-rotating 25-inch drive acts strictly as the port-side companion in a twin-engine array. You cannot run it as a standalone single engine without fighting steering torque. Proper setup requires exact mechanical throttle syncing across both outboard motors.

• Measure your twin-engine transom bracket to confirm a strict 25-inch shaft requirement.
• Link the mechanical control cables to your master binnacle to synchronize shift commands perfectly.
• Navigate restricted coastal fisheries legally utilizing advanced four-stroke combustion.

Ideal Application and Vessel Fitment

This counter-rotating 150-horsepower outboard is engineered strictly for multi-engine deep-V center consoles, large luxury offshore catamarans, and heavy twin-engine performance hulls demanding a 25-inch shaft. Operating as the port-side drive in a twin engine offshore setup, it actively cancels starboard propeller torque to keep the vessel tracking perfectly straight at high cruising speeds. It thrives in blue water tournament fishing where balancing massive thrust requires precise multi-engine power.

Warranty, Support and Maintenance

Authorized recreational operation receives a 5-Year Limited Warranty alongside exceptional factory support. Registered commercial applications fall under a strict 1-Year Limited Warranty with zero corrosion coverage applied to the block. Scheduled maintenance requires replacing gearcase lubricants and changing oil filters at manual-specified intervals. Always save all physical service records. Your engine serial number acts as the only way to source exact genuine replacement parts. Mulmotor provides product-information support before purchase and assistance with order-related questions.