Mercury 80ELPT 80HP Outboard – Jet Drive, Remote, EFI

Description

Deploy the massive-displacement, 2.1-liter Mercury 80ELPT to conquer shallow rocky riverbeds that destroy standard gearcases. Utilizing a 115hp-class powerhead, this EFI block forces high-pressure water directly through the pump volute, delivering 80 horsepower of pure jet thrust for extreme backcountry access. Verifying your hull geometry confirms this mercury 80hp jet drive outboard mounts correctly to a 25-inch tall jet-specific transom.

Eradicate severe bow rise during aggressive holeshots by leveraging the factory hydraulic power trim as a direct mechanical solution. You simply tuck the engine inward from the console switch to push the bow down fast and maintain a shallow draft. Engineers cast the 165 kg jet pump housing from heavy-duty impact alloys. This structural barrier survives direct gravel bar impacts when repowering mid-sized aluminum boats for shallow river running.

Key Features of Mercury 80ELPT

• Direct Drive Jet Pump: Eliminates the vulnerable lower unit gearcase entirely, allowing safe navigation over shallow rocky riverbeds without catastrophic drivetrain damage.
• 2.1-Liter Powerhead Block: Generates 115 horsepower internally to offset jet pump parasitic loss, delivering a true 80 horsepower of thrust at the nozzle.
• Hydraulic Power Trim: Adjusts the running angle dynamically via a console switch, optimizing hull attitude instantly to maintain a flat, shallow draft.
• Remote Steering Bracketry: Accepts standard mechanical cables directly from your forward helm, integrating flawlessly for precise directional control in narrow rivers.
• 35-Amp Charging Alternator: Outputs massive electrical current underway, powering essential navigation lights and multiple fish finders reliably against strong river currents.
• Impact-Deflecting Alloy Housing: Forms a rigid structural barrier around the jet pump volute, defying severe abrasion from gravel and sand ingestion.
• Through-Pump Exhaust: Channels toxic combustion gases directly into the high-velocity water stream, keeping the operator station completely free of smoke.
• Accessible Inline Fuel Filter: Traps dirty gas debris before it reaches the injectors, preventing sudden engine stalling miles from the boat ramp.
• Stainless Steel Impeller: Withstands aggressive abrasion from sand and gravel intake, maintaining tight pump tolerances for maximum thrust efficiency.
• Clean Four-Stroke Combustion: Burns fuel highly efficiently without oil mixing, easily meeting strict local waterway emissions regulations and EPA standards.

Why Choose Mercury 80ELPT

You select this specialized jet outboard strictly to run extreme shallow water rivers from a remote forward console. It demands a flat-bottom hull with a 25-inch tall transom to align the jet intake properly. Securing a remote steer jet outboard prevents catastrophic lower unit destruction.

• Confirm your flat-bottom aluminum hull features a strict 25-inch jet-cut transom.
• Install corresponding mechanical control cables sized exactly for your specific boat length.
• Meet strict lake emission standards via certified low-emission combustion processes.

Ideal Application and Vessel Fitment

This specialized remote-steered jet outboard is built exclusively for flat-bottom aluminum river sleds, shallow-draft jon boats, and specialized skinny-water hunting skiffs equipped with forward consoles. Because the direct-drive jet pump sits flush with the hull bottom, it completely eliminates the draft penalties of a standard propeller, allowing operators to run on plane across mere inches of water. It thrives in treacherous, rock-strewn rivers where traditional gearcases would instantly shatter, delivering unmatched backcountry access for extreme anglers requiring heavy payload capacity.

Warranty, Support and Maintenance

Authorized recreational operation receives a 3-Year Limited Warranty alongside a 3-Year Corrosion Warranty. Registered commercial applications fall under a strict 1-Year Limited Warranty with zero corrosion coverage applied to the block. Scheduled maintenance requires greasing jet pump bearings and changing powerhead oil filters at manual-specified intervals. Always save all physical service records. Your engine serial number acts as the only way to source exact genuine replacement parts. Mulmotor provides product-information support before purchase and assistance with order-related questions.