Mercury 30MHGA 30HP Outboard – 15in Shaft, Tiller, EFI

SKU: 30MHGA
In Stock

No fuel smell, Mercury 30MHGA generates 30 horsepower. Rigging includes a 15-inch shaft and tiller steering. The block runs EFI technology. Anglers rely on it for predictable starts, trip after trip.

  • 30 horsepower on tap
  • Shaft length 15 inches
  • Tiller steering, simple setup
  • EFI fuel delivery system
  • Backed by standard marine warranty
$3,435.00
In Stock
Add to wishlist
Category: Brand:

Description

Secure the battery-free, 500cc Mercury 30MHGA to eliminate heavy starter batteries on remote camp skiffs. The inline three-cylinder block forces aggressive low-end torque, pushing heavily loaded utility boats upstream against morning river currents. Measuring your hull geometry ensures this 15 inch short shaft tiller outboard fits perfectly without excessive lower unit drag.

Lift the engine block effortlessly over shallow gravel bars by utilizing the integrated gas-assist tilt cylinder as a mechanical lifting aid. You pop the tiller release to let the 65 kg gearcase spring upward instantly without straining your back. Engineers build the assembly with low-copper marine aluminum. This physical barrier stops galvanic decay when repowering standard transom utility boats in brackish water.

Key Features of Mercury 30MHGA

  • Battery-Free EFI: Atomizes fuel perfectly using internal magnetic power, guaranteeing reliable cold-weather pull starts without requiring a 12-volt battery.
  • 15-Inch Standard Shaft: Matches low transom profiles perfectly, preventing lower unit drag and maximizing top speed on light utility skiffs.
  • Gas-Assist Tilt Cylinder: Offsets the engine block weight mechanically, allowing the operator to lift the gearcase safely with minimal physical effort.
  • Multi-Function Tiller Handle: Concentrates shift and throttle inputs squarely in your grip, sharpening handling response in narrow, twisting creeks.
  • 17-Amp Charging Alternator: Outputs constant electrical current while running, keeping small deep cycle batteries topped off for demanding fish finders.
  • Manual Recoil Starting: Strips heavy starter motors and battery cables completely from your boat layout, maximizing available gear payload capacity.
  • 500cc Inline-Three Block: Produces massive low-end torque internally, lifting heavy aluminum work boats onto plane much faster.
  • Through-Prop Exhaust: Channels toxic combustion gases directly underwater, keeping the aft operator station completely free of choking smoke.
  • Accessible Oil Drain: Simplifies routine crankcase lubrication changes, saving significant time during seasonal maintenance prep without specialized tools.
  • 2.17:1 Gear Ratio: Multiplies engine torque effectively, pushing heavily loaded hunting boats upstream against strong river currents.

Why Choose Mercury 30MHGA

This specific build fits only 15-inch transoms requiring direct physical tiller control. Mounting it on a tall 20-inch transom causes severe water pump starvation. You cannot wire this to a forward console steering wheel. Procuring a reliable manual start short shaft outboard secures off-grid independence.

  • Confirm a 15-inch vertical measurement from the transom top to the keel.
  • Verify the tiller handle sweep path clears your rear bench seating completely.
  • Avoid oil slicks on the water utilizing modern four-stroke internal lubrication.

Ideal Application and Vessel Fitment

This 15-inch manual-start tiller engine is engineered specifically for standard-transom aluminum work skiffs, rigid fiberglass camp boats, and commercial river-running hulls. By stripping away heavy electric starter motors and integrating a pressurized gas tilt cylinder, operators gain maximum payload capacity while still being able to navigate shallow gravel bars easily. The advanced battery-free EFI guarantees this 30 hp short shaft tiller outboard fires instantly in freezing weather, making it the ultimate off-grid power plant for rugged backcountry exploration.

Warranty, Support and Maintenance

Authorized recreational operation receives a 3-Year Limited Warranty alongside a 3-Year Corrosion Warranty. Registered commercial applications fall under a strict 1-Year Limited Warranty with zero corrosion coverage applied to the block. Scheduled maintenance requires replacing gearcase lubricants and changing oil filters at manual-specified intervals. Always save all physical service records. Your engine serial number acts as the only way to source exact genuine replacement parts. Mulmotor provides product-information support before purchase and assistance with order-related questions.

Mercury 30HP 30MHGA Specs

BrandMercury Marine
Full Model Code30MHGA FourStroke EFI
Engine TypeInline 3-Cylinder SOHC
Displacement500 cc
Horsepower30 HP
Full Throttle RPM Range5800-6200 RPM
Fuel Induction SystemEFI (Battery-Free)
Alternator Output17 Amps
Shaft LengthL (20 inch)
Dry Weight65 kg
Starting & Steering SystemManual Recoil / Tiller Handle
Trim/Tilt MethodGas Assist Tilt
FeaturesBattery-Free EFI, High Torque 3-Cylinder Engine
ApplicationWork Boats, Remote Fishing Hulls, Utility Boats

Reviews

There are no reviews yet.

Be the first to review “Mercury 30MHGA 30HP Outboard – 15in Shaft, Tiller, EFI”

Your email address will not be published. Required fields are marked *

Log in

You dont have an account yet? Register Now

Search

Categories

Your Cart