Honda BFP60AK1LHTC 60HP Outboard – 20in Shaft, Tiller, Power Trim

Equip Honda BF40DK4LHC on a 20-inch-transom aluminum fishing boat or work skiff when fuel injection, tiller control, and 40 HP are required together. Its 808 cc inline three-cylinder SOHC 4-stroke engine uses 12 valves and Programmed Fuel Injection. Honda BF40DK4LHC is an electric-start outboard with a tiller handle, gas-assist tilt, BLAST, Lean Burn Control, and NMEA 2000 compatibility. The long shaft suits compatible heavy aluminum hulls.

At approximately 216 lbs dry, this model should be included in transom and total boat-loading calculations. The 5,000–6,000 RPM full-throttle range provides a reference for propeller setup, while the 2.08:1 gear ratio supports standard forward, neutral, and reverse operation. Its 22-amp alternator supplies 17 net charging amps for supported electronics and accessories. Confirm the boat’s horsepower rating, transom height, battery requirements, and installation limits before purchase.

Key Features of Honda BF40DK4LHC

• Fit the 20-inch long shaft to heavy aluminum boats and fishing hulls.
• Programmed Fuel Injection — manages fuel delivery within the 808 cc three-cylinder engine.
• 40 HP at the specified RPM range suits properly rated small boats.
• 216 lbs dry weight requires suitable transom capacity and balance planning.
• Gas-Assist Tilt helps position the motor for shallow-water use and storage.
• Tiller Handle keeps throttle and steering directly available at the outboard.
• BLAST and Lean Burn Control provide the listed operating features.
• NMEA 2000 compatibility connects supported engine information with compatible marine displays.

Why Choose the Honda BF40DK4LHC

This configuration adds fuel injection and electric starting to a direct tiller layout. It suits owners who want more engine output for an aluminum fishing boat without moving to remote controls. Gas-assist tilt also helps with engine positioning when the boat is not underway.

• Fuel injection suits modern tiller setups
• Electric start supports regular boat use
• NMEA 2000 supports compatible displays

Applications & Use Cases

Honda BF40DK4LHC is intended for heavy aluminum boats, workboats, and 15- to 17-foot fishing hulls using a compatible 20-inch transom. It can support fishing, utility work, shoreline travel, and recreational operation within the vessel’s approved limits.

• Heavy aluminum fishing boats
• 15- to 17-foot workboats
• Fishing hulls using tiller controls

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for engine oil, gearcase lubricant, filters, spark plugs, cooling-system checks, tiller controls, gas-assist tilt, and NMEA 2000 connections. Confirm exact fluid quantities, intervals, registration, and dealer support before purchase.