Honda BFP10D3XRT 9.9HP Outboard – 25in Shaft, Electric, Remote, Power Tilt

Pair Honda BFP10D3XRT with a sailboat or remote-steer auxiliary boat when an extra-long shaft, high-thrust gearing, and remote control are required. Its 222 cc inline two-cylinder SOHC 4-stroke engine produces 9.9 HP at 5,000 RPM, while the 2.33:1 high-thrust gear ratio favors low-speed maneuvering. Honda BFP10D3XRT is a Power Thrust outboard with electric and manual starting, remote controls, Power Tilt, a 25-inch ultra-long shaft, and a 12-amp alternator.

At 117 lbs dry, the motor should be included in the boat’s transom and total loading calculations. The remote-control arrangement moves throttle and steering functions to the helm, which suits boats where the operator does not sit directly beside the outboard. Power Tilt helps with launching, docking, and storage. Confirm the boat’s transom height, remote rigging, battery system, propeller selection, and horsepower requirements before ordering.

Key Features of Honda BFP10D3XRT

• Use the 25-inch ultra-long shaft on compatible sailboat and high-transom installations.
• High-Thrust Gearcase — uses a 2.33:1 ratio for controlled low-speed auxiliary operation.
• 9.9 HP at 5,000 RPM comes from a 222 cc two-cylinder SOHC engine.
• 117 lbs dry weight requires careful transom, battery, trailer, and balance planning.
• Remote Control — places throttle and steering functions at the boat’s helm.
• Electric and Manual Start provide the two listed starting methods.
• Power Tilt adjusts engine position during launch, docking, shallow-water travel, and storage.
• 12-amp alternator supports compatible navigation lights and onboard electrical equipment.

Why Choose the Honda BFP10D3XRT

The remote-control layout separates this model from tiller versions, making it suitable for boats with a dedicated helm. Its ultra-long shaft and Power Thrust gearing address high-transom and low-speed auxiliary requirements.

• Remote controls suit dedicated helm layouts
• Ultra-long shaft fits high transoms
• Power Tilt supports engine positioning

Applications & Use Cases

Honda BFP10D3XRT is intended for sailboats and other remote-steer boats requiring a 25-inch ultra-long shaft. It can support auxiliary sailing, harbor maneuvering, tender movement, and low-speed utility operation when the vessel accepts the engine’s weight and 9.9 HP rating.

• Sailboat auxiliary propulsion
• Remote-steer high-transom boats
• Low-speed tender maneuvering

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for engine oil, gearcase lubricant, filters, spark plugs, cooling-system checks, remote controls, battery care, Power Tilt, and high-thrust propeller service. Confirm rigging compatibility, fluid quantities, service intervals, and dealer support before purchase.