Honda BF8DK3SHC 8HP 4-Stroke Outboard – 15in Shaft, Tiller
Rigged simply, Honda BF8DK3SHC moves boats with 8 horsepower. Rigging includes a 15-inch shaft and tiller steering. Built to Canada emission standards. It favors reliability over extra complexity at the helm.
- Meets Canada emission compliance standards
- 8 horsepower, ready to run
- Fits 15-inch transom height
- Tiller steering, simple setup
- Backed by standard marine warranty
Description
Pair Honda BF8DK3SHC with a small inflatable, Jon boat, or aluminum skiff when 8 HP, a 15-inch shaft, and low-weight manual control are required. Its 222 cc OHC two-cylinder 4-stroke engine uses four valves and a carbureted fuel system. Honda BF8DK3SHC is a portable outboard with manual recoil starting, tiller steering, manual tilt, a 6-amp alternator, and an integrated carry handle. The short shaft is intended for compatible lower transoms.
At approximately 93 lbs dry, the motor remains part of the boat’s transport and transom calculations. Its 4,500–5,500 RPM full-throttle range provides the listed setup reference, while the 2.33:1 gear ratio supports standard forward, neutral, and reverse operation. Five-position manual tilt allows lower-unit adjustment for selected shallow-water or storage situations. Confirm the boat’s 15-inch transom, horsepower rating, total load, and propeller requirements before installation.
Key Features of Honda BF8DK3SHC
- Fit the 15-inch short shaft to compatible inflatables, Jon boats, and aluminum skiffs.
- OHC Engine — uses a 222 cc two-cylinder 4-stroke configuration with four valves.
- 8 HP at the listed RPM range suits properly rated compact boats.
- 93 lbs dry weight supports portable handling and requires suitable transom capacity.
- Integrated Carry Handle helps move the motor between storage, transport, and the boat.
- Manual Recoil Start keeps the electrical setup simple for small-craft use.
- Five-position manual tilt changes lower-unit clearance during selected shallow-water conditions.
- 6-amp alternator provides electrical output for supported small-boat equipment.
Why Choose the Honda BF8DK3SHC
This model focuses on simple handling and direct operation for small boats. The short shaft fits lower transoms, while the carry handle, manual starting, and five-position tilt support owners who regularly transport or store the outboard.
- 15-inch shaft fits compatible short transoms
- Carry handle supports easier movement
- Manual tilt assists shallow-water positioning
Applications & Use Cases
Honda BF8DK3SHC is suited to inflatables, small Jon boats, 12- to 14-foot aluminum skiffs, and other compact hulls using a 15-inch transom. It can support fishing, shoreline access, utility travel, and short recreational trips when the vessel accepts 8 HP.
- Small inflatable boats
- 12- to 14-foot aluminum skiffs
- Jon boats with short transoms
Warranty, Support & Maintenance
The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for engine oil, gearcase lubricant, spark plugs, carburetor service, cooling-system checks, manual tilt, carry-handle inspection, and storage preparation. Confirm fluid quantities, service intervals, registration, and dealer support before purchase.
Honda 8HP BF8DK3SHC Specs
| Brand | Honda Marine |
| Full Model Code | BF8DK3SHC |
| Country of Origin | Japan |
| Engine Type | 4-Stroke OHC 2-Cylinder 4-Valve |
| Displacement | 222 cc |
| Horsepower | 8 HP |
| Full Throttle RPM Range | 4500-5500 RPM |
| Fuel Induction System | Carbureted |
| Alternator Output | 6 Amps |
| Gear Ratio | 2.33:1 |
| Shaft Length | S (15 inch) |
| Dry Weight | 42 kg |
| Starting & Steering System | Manual Recoil / Tiller Handle |
| Trim/Tilt Method | Manual Tilt (5 Positions) |
| Features | World's Lightest 8HP 4-Stroke, Integrated Carry Handle |
| Application | Inflatables, Small Jon Boats, 12-14ft Aluminum Skiffs |












Reviews
There are no reviews yet.