Honda BF8DK3SHA 8HP Outboard – 15in Shaft, Tiller, Manual Start
No guesswork, Honda BF8DK3SHA answers with 8 horsepower. A 15-inch shaft pairs with tiller steering. Boaters pick it for a straightforward, low-maintenance setup. A fit for dinghies, jon boats, and small tenders.
- 8 horsepower, ready to run
- Shaft length 15 inches
- Tiller steering, simple setup
- Manual start, no battery needed
- Light enough for easy mounting
Description
Position Honda BF8DK3SHA on a short-transom utility boat when manual starting, a 15-inch shaft, and direct tiller operation are the preferred setup. Its 222 cc inline two-cylinder SOHC 4-stroke engine produces 8 HP at 5,500 RPM. Honda BF8DK3SHA is a portable outboard with a single-carburetor fuel system, multi-function tiller, manual tilt with shallow-water drive, and a 6-amp alternator. The short shaft suits compatible 15-inch transoms.
At 93 lbs dry, this configuration should be considered during transport, storage, and transom planning. The 5,000–6,000 RPM full-throttle range provides a reference for propeller and load checks, while the 2.33:1 gear ratio supports forward, neutral, and reverse operation. Shallow-water drive lets the operator raise the lower unit for selected near-shore conditions. Confirm transom height, hull rating, propeller fitment, and the model’s exact operating range before use.
Key Features of Honda BF8DK3SHA
- Fit the 15-inch short shaft to compatible small boats, tenders, and utility hulls.
- Manual Start — keeps the motor independent of an electric starting battery.
- 222 cc inline two-cylinder SOHC engine provides 8 HP at 5,500 RPM.
- 93 lbs dry weight supports portable handling while requiring suitable transom capacity.
- Multi-Function Tiller provides direct steering and throttle control at the motor.
- Shallow-Water Drive changes lower-unit clearance during selected near-shore operating conditions.
- 6-amp alternator supplies electrical output for supported small-boat equipment.
- Manual Tilt adjusts the engine position for shallow water, launching, and storage.
Why Choose the Honda BF8DK3SHA
The short shaft and 93-lb dry weight make this model practical for compact boats that are carried, stored, or launched frequently. Manual controls keep the installation uncomplicated, while shallow-water drive adds useful clearance for selected operating situations.
- 15-inch shaft suits compatible short transoms
- Manual controls simplify boat setup
- Shallow-water drive supports near-shore use
Applications & Use Cases
Honda BF8DK3SHA is intended for small aluminum boats, utility boats, tenders, and other short-transom hulls using a compatible 15-inch transom. It can support fishing, shoreline access, harbor movement, and auxiliary propulsion when the boat is approved for 8 HP.
- Small aluminum boats
- Short-transom tenders
- Utility hulls using tiller control
Warranty, Support & Maintenance
The supplied product information lists a 5-year non-declining standard warranty. Follow the Honda owner’s manual for engine oil, gearcase lubricant, spark plugs, carburetor service, cooling-system checks, manual tilt, shallow-water drive, and storage preparation. Confirm the exact dry weight, charging output, service intervals, and warranty registration before purchase.
Honda 8HP BF8DK3SHA Specs
| Brand | Honda Marine |
| Full Model Code | BF8DK3SHA |
| Engine Family/Series | Portable Series |
| Engine Type | Inline 2 / SOHC / 4-Stroke |
| Displacement | 0.22 Liters (222 cc) |
| Horsepower | 8 HP @ 5500 RPM |
| Full Throttle RPM Range | 5000 - 6000 RPM |
| Alternator Output | 6 Amps (12V 76W) |
| Shaft Length | 15" (Short) |
| Dry Weight | 42 kg (93 lbs) |
| Starting & Steering System | Manual Start w/ Multi-Function Tiller |
| Trim/Tilt Method | Manual Tilt (w/ Shallow Water Drive) |
| Standard Warranty | 5-Year Non-Declining |
| Application | Quiet and refined 8HP with a high-displacement block for steady trolling and reliability. |












Reviews
There are no reviews yet.