Honda BF5DHLHC 5HP Outboard – 20in Shaft, Tiller

Place Honda BF60A1JRTA on a shallow-water boat when jet propulsion is needed instead of a conventional propeller. Its 998 cc inline three-cylinder SOHC 4-stroke engine produces 40 HP at the pump and 60 HP at the powerhead. Honda BF60A1JRTA is a VTEC Jet Drive with Programmed Fuel Injection, electric starting, remote mechanical control, Power Trim & Tilt, and direct-drive gearing. The listed shaft is 20 inches and is designed for a 25-inch jet transom.

The 260-lb dry weight should be considered during transom, trailer, and balance planning. Because the jet unit has no exposed propeller, it is suited to rocky shallows, sandbars, and technical river routes where propeller clearance is a concern. The 5,000–6,000 RPM full-throttle range provides a reference for setup, while the 22-amp alternator supplies 17 charging amps for supported equipment. The listed engine oil capacity is 2.6 L, with jet-drive service and flushing performed according to the applicable Honda manual.

Key Features of Honda BF60A1JRTA

• Use the jet drive in shallow rivers, technical flats, and other propeller-sensitive boating areas.
• Jet Powerhead — provides 60 HP at the engine and 40 HP at the pump.
• 998 cc inline three-cylinder SOHC engine uses 12 valves and Programmed Fuel Injection.
• 260 lbs dry weight requires suitable transom capacity and careful boat-balance planning.
• Direct Drive — transfers engine power through the jet system without a conventional propeller.
• Remote Mechanical Control keeps throttle and steering functions available at the helm.
• Power Trim & Tilt adjusts the jet unit during acceleration, docking, and trailering.
• 22 amps total with 17 charging amps support compatible onboard equipment.

Why Choose the Honda BF60A1JRTA

The jet-drive layout addresses waterways where a propeller may be vulnerable to rocks, sandbars, or shallow running areas. The BF60-based powerhead supplies the listed 40 HP at the pump, while remote controls and Power Trim & Tilt support helm-based operation.

• Jet drive reduces conventional propeller exposure
• 40 HP at pump suits listed applications
• Direct drive supports shallow-water propulsion

Applications & Use Cases

Honda BF60A1JRTA is intended for shallow rocky rivers, technical flats, and compatible jet-drive boats using a 25-inch jet transom. It can support river running, shallow-water fishing, and utility travel when the hull, jet mounting, steering, and operating environment match the manufacturer’s requirements.

• Shallow rocky river routes
• Technical flats with propeller concerns
• Jet-drive utility and fishing boats

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for the 2.6 L oil capacity, jet-drive inspection, gearcase lubricant requirements, filters, spark plugs, cooling-system checks, and flushing procedures. Confirm the 20-inch shaft and 25-inch jet-transom fitment before purchase.