Honda BF40DK4LHC 40HP 4-Stroke Outboard – 20in Shaft, Tiller

Equip Honda BF40DK4LHC when a 20-inch-transom workboat or 15- to 17-foot fishing hull needs 40 HP with direct tiller control. Its 808 cc inline three-cylinder SOHC 4-stroke engine uses 12 valves and Programmed Fuel Injection. Honda BF40DK4LHC is a portable-style outboard with electric starting, a tiller handle, gas-assist tilt, BLAST, Lean Burn Control, and NMEA 2000 compatibility. The long shaft suits compatible heavy aluminum boats and work skiffs.

At 216 lbs dry, the engine should be included in transom, trailer, and total boat-loading calculations. Its 5,000–6,000 RPM full-throttle range provides a propeller setup reference, while the 2.08:1 gear ratio supports forward, neutral, and reverse operation. The 22-amp alternator supplies 17 net charging amps for supported electronics and accessories. Confirm the hull rating, transom height, control arrangement, battery requirements, and installation dimensions before purchase.

Key Features of Honda BF40DK4LHC

• Fit the 20-inch long shaft to heavy aluminum boats and 15- to 17-foot fishing hulls.
• Programmed Fuel Injection — manages fuel delivery within the 808 cc three-cylinder engine.
• 40 HP at the specified operating range provides a defined option for approved boats.
• 216 lbs dry weight requires careful transom capacity and balance planning.
• Gas-Assist Tilt helps position the engine during shallow-water running and storage.
• Tiller Handle keeps throttle and steering directly available at the motor.
• BLAST and Lean Burn Control provide the listed operating features for supported conditions.
• NMEA 2000 compatibility connects supported engine information with compatible marine displays.

Why Choose the Honda BF40DK4LHC

This model suits owners who want fuel injection and 40 HP while retaining direct tiller operation. Gas-assist tilt helps with engine positioning, and the charging system provides practical electrical support for fishing electronics used on properly equipped boats.

• Fuel injection suits modern tiller setups
• Gas-assist tilt supports storage
• NMEA 2000 supports compatible displays

Applications & Use Cases

Honda BF40DK4LHC is intended for heavy aluminum boats, workboats, and 15- to 17-foot fishing hulls using a 20-inch transom. It can support fishing, utility work, shoreline travel, and recreational operation when the boat accepts the engine’s weight and 40 HP rating.

• Heavy aluminum fishing boats
• 15- to 17-foot workboats
• Fishing hulls with tiller controls

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for engine oil, gearcase lubricant, filters, spark plugs, cooling-system checks, tiller controls, gas-assist tilt, and NMEA 2000 connections. Confirm exact fluid quantities, service intervals, registration, and dealer support before purchase.