Honda BF250DXDA 250HP Outboard – 25in Shaft, iST, Drive-by-Wire, V6, VTEC

Place Honda BF250DXDA on a standard-rotation offshore center console when iST digital control, a 25-inch X-long shaft, and 250 HP are needed together. Its 3.6-liter, 60-degree V6 engine uses 24 valves and SOHC operation, producing 250 HP at 5,800 RPM. Honda BF250DXDA is a VTEC 4-stroke outboard with Programmed Fuel Injection, electric starting, Intelligent Shift and Throttle, and Power Trim & Tilt. The standard-rotation configuration suits compatible digital helm systems.

The 613-lb dry weight should be included in the boat’s transom, repower, trailer, battery, and balance calculations. Its 5,300–6,300 RPM full-throttle range provides a reference for propeller selection, while the 2.00:1 gear ratio supports standard forward, neutral, and reverse operation. The 90-amp alternator supplies 60 charging amps for supported navigation displays, pumps, lighting, and communication equipment. The listed engine oil capacity is 7.8 L with filter, with gearcase service directed by the Honda manual.

Key Features of Honda BF250DXDA

• Fit the 25-inch X-long shaft to boats designed for compatible tall transoms.
• Standard Rotation — identifies the listed drive arrangement for compatible digital installations.
• 250 HP at 5,800 RPM comes from a 3.6-liter V6 SOHC engine.
• 613 lbs dry weight affects transom capacity, repower balance, and trailer loading.
• Intelligent Shift and Throttle provides drive-by-wire control for supported digital helm systems.
• Programmed Fuel Injection manages fuel delivery within the specified 24-valve 4-stroke package.
• Power Trim & Tilt adjusts engine angle during acceleration, cruising, docking, and trailering.
• 90 amps total with 60 charging amps support compatible onboard electrical equipment.

Why Choose the Honda BF250DXDA

The combination of standard rotation, iST control, and a 25-inch shaft gives this model a clear role in digital-ready offshore installations. Its 250 HP rating provides a defined power choice for approved boats carrying larger passenger and equipment loads.

• Standard rotation suits compatible digital rigs
• iST controls keep operation at the helm
• 25-inch shaft matches compatible transoms

Applications & Use Cases

Honda BF250DXDA is suited to standard-rotation offshore center consoles, twin-engine boats, and recreational hulls using a compatible 25-inch transom. It can support offshore fishing, coastal cruising, family boating, and harbor travel when the vessel accepts the engine’s weight and iST control requirements.

• Offshore center consoles with X-long shafts
• Standard-rotation digital boat installations
• Recreational boats using iST controls

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for the 7.8 L oil capacity with filter, gearcase lubricant, filters, spark plugs, cooling-system inspection, iST controls, and Power Trim & Tilt. Confirm digital compatibility, service intervals, warranty registration, and dealer support before purchase.