Honda BF250DURA 250HP Outboard – 30in Shaft, Remote Mechanical, V6, VTEC

Choose Honda BF250DURA for a high-transom offshore hull that needs 250 HP, a 30-inch U-long shaft, and traditional mechanical cable controls. Its 3.6-liter, 60-degree V6 engine uses 24 valves and SOHC operation, producing 250 HP at 5,800 RPM. Honda BF250DURA is a Signature Silver VTEC 4-stroke outboard with Programmed Fuel Injection, electric starting, remote mechanical control, and Power Trim & Tilt. The configuration is intended for conventional mechanical rigging.

At 622 lbs dry, the motor should be included in the vessel’s transom, repower, trailer, and balance calculations. The 30-inch U-long shaft provides extended transom reach for compatible offshore boats, while the 5,300–6,300 RPM full-throttle range helps guide propeller selection. Its 2.00:1 gear ratio supports standard forward, neutral, and reverse operation. The 90-amp alternator supplies 60 charging amps for supported electronics, and the listed engine oil capacity is 7.8 L with filter.

Key Features of Honda BF250DURA

• Mount the 30-inch U-long shaft on boats designed for extended transom reach.
• VTEC Powerhead — produces 250 HP at 5,800 RPM from a 3.6-liter V6 engine.
• 622 lbs dry weight requires attention to transom capacity, trailer loading, and balance.
• Programmed Fuel Injection manages fuel delivery within the supplied 4-stroke configuration.
• Remote Mechanical Control connects throttle and shifting to conventional cable rigging.
• Power Trim & Tilt adjusts engine angle during acceleration, cruising, docking, and trailering.
• 90 amps total with 60 charging amps support compatible onboard electrical equipment.
• 2.00:1 gear ratio supports standard forward, neutral, and reverse operation.

Why Choose the Honda BF250DURA

The U-long shaft gives this model a clear purpose on large boats with extended transom requirements. Mechanical controls suit conventional cable rigging, while the 250 HP V6 provides a defined propulsion option for properly rated offshore hulls.

• 30-inch shaft suits high-transom boats
• Mechanical controls fit traditional rigging
• 250 HP supports approved offshore hulls

Applications & Use Cases

Honda BF250DURA is intended for high-transom offshore hulls using traditional mechanical cable rigging. It can support offshore fishing, coastal cruising, harbor travel, and recreational boating when the vessel accepts the engine’s weight, horsepower, shaft length, and control arrangement.

• High-transom offshore boats
• Mechanical-control fishing vessels
• Large recreational hulls requiring 250 HP

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the Honda owner’s manual for the 7.8 L oil capacity with filter, gearcase lubricant, filters, spark plugs, cooling-system checks, remote controls, and Power Trim & Tilt. Confirm U-long shaft fitment, service intervals, warranty registration, and dealer support before purchase.