Honda BF250DUCRA 250HP Outboard – 30in Shaft, Counter Rotation, V6

Support Honda BF250DUCRA in a port-side twin-engine installation when a 30-inch U-long shaft and mechanical counter-rotation are required. Its 3.6-liter V6 engine uses a 60-degree layout, 24 valves, SOHC operation, and VTEC technology, producing 250 HP at 5,800 RPM. Honda BF250DUCRA is a mechanical-control 4-stroke outboard with Programmed Fuel Injection, electric starting, remote mechanical controls, and Power Trim & Tilt. The configuration is listed for dual-engine offshore cruisers.

The 622-lb dry weight should be included in the complete twin-engine load, along with batteries, fuel, rigging, passengers, and onboard equipment. Its 30-inch U-long shaft addresses extended transom requirements, while the 5,300–6,300 RPM full-throttle range provides a setup reference for propeller selection. The 90-amp alternator supplies 60 charging amps for supported marine electronics. The listed oil capacity is 7.8 L with filter, with gearcase service governed by the Honda manual.

Key Features of Honda BF250DUCRA

• Mount the 30-inch U-long shaft on boats designed for extended transom reach.
• Counter-Rotation Drive — provides the listed port-side layout for twin mechanical-control systems.
• V6 Engine — combines 3.6 liters, 24 valves, SOHC operation, and 250 HP output.
• 622 lbs dry weight requires careful twin-engine transom and boat-balance planning.
• Programmed Fuel Injection manages fuel delivery throughout the supplied V6 4-stroke system.
• Remote Mechanical Control connects throttle and shifting to conventional helm rigging.
• Power Trim & Tilt changes engine angle during acceleration, cruising, docking, and trailering.
• 90 amps total with 60 charging amps support compatible offshore electrical equipment.

Reasons to Choose the Honda BF250DUCRA

The counter-rotation configuration gives this model a defined position in twin mechanical-control systems. Its U-long shaft suits high-transom boats, while the 250 HP V6 provides a clear output level for properly rated offshore cruisers using traditional rigging.

• Counter-rotation supports listed port-side twin use
• 30-inch shaft fits compatible U-long transoms
• Mechanical controls support conventional rigging

Applications & Use Cases

Honda BF250DUCRA is intended for port-side twin installations on offshore cruisers using mechanical controls and 30-inch transoms. It can support offshore fishing, coastal travel, harbor cruising, and recreational operation when the vessel accepts the combined weight and counter-rotation arrangement.

• Port-side twin offshore configurations
• Mechanical-control offshore cruisers
• High-transom vessels requiring 250 HP

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for the 7.8 L oil capacity with filter, gearcase lubricant, filters, spark plugs, cooling-system checks, mechanical controls, Power Trim & Tilt, and counter-rotation service. Confirm twin-engine rigging and warranty requirements before purchase.