Honda BF225DUCRA 225HP Outboard – 30in Shaft, Counter Rotation, V6

Equip Honda BF225DUCRA for a port-side twin-engine offshore installation when a 30-inch U-long shaft and mechanical counter-rotation are required. Its 3.6-liter, 60-degree V6 engine uses 24 valves and SOHC operation, producing 225 HP at 5,500 RPM. Honda BF225DUCRA is a mechanical-control 4-stroke outboard with Programmed Fuel Injection, electric starting, remote mechanical controls, and Power Trim & Tilt. The counter-rotation arrangement is intended for compatible twin cable-rigged systems.

The 622-lb dry weight should be included in the total twin-engine, transom, trailer, battery, fuel, and passenger calculations. Its 30-inch U-long shaft addresses extended transom requirements, while the 5,000–6,000 RPM full-throttle range helps guide propeller selection after rigging. A 90-amp alternator provides 60 charging amps for supported offshore electronics and accessories. The listed 7.8 L oil capacity includes filter replacement, with gearcase service directed by the applicable Honda owner’s manual.

Key Features of Honda BF225DUCRA

• Mount the 30-inch U-long shaft on boats designed for extended transom reach.
• Counter-Rotation Drive — provides the listed port-side arrangement for twin mechanical-control applications.
• V6 Powerhead — combines 3.6 liters, 24 valves, SOHC operation, and 225 HP output.
• 622 lbs dry weight requires careful twin-engine transom and balance planning.
• Programmed Fuel Injection manages fuel delivery within the specified 4-stroke V6 package.
• Remote Mechanical Control connects throttle and shifting to conventional cable rigging.
• Power Trim & Tilt changes engine angle during acceleration, cruising, docking, and trailering.
• 90 amps total with 60 charging amps support compatible onboard electrical equipment.

Reasons to Choose the Honda BF225DUCRA

The counter-rotation configuration gives this model a defined position in twin mechanical-control installations. Its U-long shaft suits boats with extended transom requirements, while the 225 HP V6 provides the output for properly rated offshore vessels using traditional cable rigging.

• Counter-rotation supports listed port-side twin use
• 30-inch shaft fits compatible U-long transoms
• Mechanical controls support conventional rigging

Applications & Use Cases

Honda BF225DUCRA is intended for port-side twin mechanical installations on offshore boats using 30-inch transoms. It can support offshore fishing, coastal cruising, harbor travel, and recreational operation when the vessel accepts the twin-engine layout, combined weight, counter-rotation configuration, and 225 HP output.

• Port-side twin offshore configurations
• Mechanical boats with extended transoms
• Offshore fishing and coastal travel

Warranty, Support & Maintenance

The supplied product information identifies a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for the 7.8 L oil capacity with filter, gearcase lubricant, filters, spark plugs, cooling-system inspection, mechanical controls, Power Trim & Tilt, and counter-rotation service. Confirm twin-engine compatibility, registration, service intervals, and dealer support before installation.