Honda BF20DK3LHGC 20HP Outboard – 20in Shaft, Tiller
For charter work, Honda BF20DK3LHGC carries 20 horsepower. The 20-inch shaft works with tiller steering. Built to Canada emission standards. It favors reliability over extra complexity at the helm.
- Built to Canada emission spec
- 20 horsepower on tap
- 20-inch shaft for most transoms
- Tiller steering, simple setup
- Backed by standard marine warranty
Description
Equip Honda BF20DK3LHGC when a heavy aluminum fishing boat needs 20 HP, a 20-inch long shaft, and power tilt with tiller steering. Its 350 cc inline two-cylinder SOHC 4-stroke engine uses four valves and produces 20 HP at 5,000 RPM. Honda BF20DK3LHGC is a carbureted portable outboard with electric starting, a tiller handle, a 12-amp alternator, and Power Tilt. The long shaft is intended for boats using a compatible 20-inch transom.
The 121-lb dry weight should be included in transom, battery, and transport planning. The engine operates within a 5,000–6,000 RPM full-throttle range, giving owners a reference for propeller selection and engine setup. Its 2.08:1 gear ratio supports standard forward, neutral, and reverse operation. Power Tilt allows the operator to raise or lower the motor during launching, docking, shallow-water travel, and storage without manually lifting the complete unit.
Key Features of Honda BF20DK3LHGC
- Fit the 20-inch long shaft to compatible aluminum fishing boats and heavy utility hulls.
- Power Tilt — changes engine position during launching, docking, shallow-water travel, and storage.
- 350 cc four-valve SOHC twin-cylinder engine provides 20 HP at 5,000 RPM.
- 121 lbs dry weight affects transom capacity, battery placement, and boat balance.
- Electric Start — simplifies startup while retaining direct tiller-handle steering.
- Single Carburetor provides the specified fuel-induction arrangement for this portable outboard.
- 12-amp alternator supplies charging output for supported fishing electronics and accessories.
- 5,000–6,000 RPM full-throttle range helps owners evaluate propeller selection after rigging.
Why Choose the Honda BF20DK3LHGC
Power Tilt is the main distinction for owners who want tiller control but prefer not to manually lift the engine during launch or storage. The 20-inch shaft suits long transoms, while electric starting adds convenience for regular fishing use.
- Power tilt reduces manual engine handling
- Electric start supports repeated launches
- 20 HP suits properly rated aluminum boats
Applications & Use Cases
Honda BF20DK3LHGC is suited to heavy aluminum fishing boats, utility skiffs, and other recreational hulls using a compatible 20-inch transom. It can support fishing, shoreline travel, dock movement, and small-boat cruising when the vessel accepts the 121-lb engine and 20 HP rating.
- Heavy aluminum fishing boats
- Long-transom utility skiffs
- Tiller-controlled recreational hulls
Warranty, Support & Maintenance
The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for engine oil, gearcase lubricant, filters, spark plugs, carburetor service, cooling-system inspection, battery care, tiller controls, and Power Tilt maintenance. Confirm service quantities, intervals, warranty registration, and dealer support before purchase.
Honda 20HP BF20DK3LHGC Specs
| Brand | Honda Marine |
| Full Model Code | BF20DK3LHGC |
| Country of Origin | Japan |
| Engine Type | 4-Stroke SOHC 2-Cylinder 4-Valve |
| Displacement | 350 cc |
| Horsepower | 20 HP |
| Full Throttle RPM Range | 5000-6000 RPM |
| Fuel Induction System | Carbureted |
| Alternator Output | 12 Amps (Electric Start) |
| Gear Ratio | 2.08:1 |
| Shaft Length | L (20 inch) |
| Dry Weight | 55 kg |
| Starting & Steering System | Electric Start / Tiller Handle |
| Trim/Tilt Method | Power Tilt |
| Application | Premium Tiller Fishing, Heavy Aluminum Hulls |












Reviews
There are no reviews yet.