Honda BF20D3LH 20HP Outboard – 20in Shaft, Tiller, Manual Start

Run Honda BF20D3LH when an aluminum utility boat or large tender needs 20 HP, a 20-inch shaft, and direct tiller control. Its 350 cc inline two-cylinder SOHC 4-stroke engine uses four valves and produces 20 HP at 5,000 RPM, giving properly rated small boats a useful step up from lower-output portable motors. Honda BF20D3LH is a Signature Silver outboard with a single carburetor and accelerator pump, manual starting, a multi-function tiller, manual tilt with shallow-water drive, and a 20-inch long shaft.

The 108-lb dry weight should be considered during transport, storage, and transom planning. Its 5,000–6,000 RPM full-throttle range provides a reference for propeller selection, while the 2.08:1 gear ratio supports standard forward, neutral, and reverse operation. The 6-amp alternator supplies basic electrical output for supported accessories. The listed crankcase oil capacity is 1.1 L, while gearcase lubricant, spark plug, cooling-system, and carburetor service should follow the applicable Honda owner’s manual.

Honda BF20D3LH 20-Inch Tiller Outboard for Utility Boats

• Fit the 20-inch long shaft to compatible aluminum utility boats, large tenders, and sailboat kicker installations.
• 350 cc Engine — uses an inline two-cylinder SOHC 4-stroke design with four valves.
• 20 HP at 5,000 RPM gives properly rated boats a defined propulsion option.
• 108 lbs dry weight requires attention to transom capacity, balance, and transport planning.
• Manual Tiller — places steering and throttle control directly at the outboard.
• Shallow-water drive allows lower-unit clearance adjustments during selected operating conditions.
• Single Carburetor with Accelerator Pump manages the supplied fuel-induction system.
• 6-amp alternator provides electrical output for supported onboard equipment.

Why Choose the Honda BF20D3LH

This version keeps the installation direct for owners who prefer manual starting and tiller steering. The 20-inch shaft suits long-transom boats, while the 20 HP rating provides more output for utility loads, tender movement, and small-boat fishing.

• 20-inch shaft fits compatible long transoms
• Manual tiller keeps rigging uncomplicated
• 20 HP supports approved utility boats

Applications & Use Cases

Honda BF20D3LH is suited to aluminum utility boats, large tenders, small fishing boats, and sailboat kicker applications using a compatible 20-inch transom. It can support shoreline travel, tender movement, fishing, and general utility use when the vessel is rated for 20 HP.

• Aluminum utility boats with long transoms
• Large tenders using tiller control
• Sailboat kicker installations

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for the 1.1 L crankcase oil capacity, gearcase lubricant, spark plugs, carburetor, cooling-system checks, manual tilt, and tiller controls. Confirm warranty registration, service intervals, and dealer support before purchase.