Honda BF200DXCRA 200HP Outboard – 25in Shaft, Counter Rotation

Rig Honda BF200DXCRA for a twin-engine offshore boat that needs a port-side counter-rotation unit, a 25-inch X-long shaft, and remote mechanical controls. Its 3.6-liter V6 engine uses a 60-degree layout, 24 valves, SOHC operation, and VTEC technology to produce 200 HP at 5,500 RPM. Honda BF200DXCRA is a mechanical-control 4-stroke outboard with Programmed Fuel Injection, electric starting, Power Trim & Tilt, and a 1.86:1 gear ratio. The counter-rotation configuration is intended for compatible twin mechanical rigs.

The 613-lb dry weight should be included in the combined weight of both engines, rigging, batteries, fuel, passengers, and equipment. The 5,000–6,000 RPM full-throttle range helps guide propeller selection, while the 90-amp alternator supplies 60 charging amps for supported marine electronics. The listed engine oil capacity is 7.8 L with filter. Confirm gearcase lubricant requirements, mechanical control compatibility, and port-side installation details through the applicable Honda manual and dealer.

Honda BF200DXCRA Counter-Rotation 25-Inch Outboard for Mechanical Twins

• Mount the 25-inch X-long shaft on twin boats designed for compatible tall transoms.
• V6 Engine — combines 3.6 liters, 24 valves, SOHC operation, and VTEC technology.
• The listed port-side counter-rotation layout supports selected twin mechanical installations.
• 613 lbs dry weight affects total twin-engine transom capacity and boat balance.
• Programmed Fuel Injection manages fuel delivery within the supplied V6 4-stroke engine.
• Remote mechanical controls connect throttle and shifting to conventional helm rigging.
• Power Trim & Tilt adjusts engine position during acceleration, cruising, docking, and trailering.
• 90 amps total with 60 charging amps support compatible electrical equipment.

Reasons to Choose the Honda BF200DXCRA

The counter-rotation layout gives this model a specific purpose in twin mechanical-control systems. It retains conventional helm rigging while providing the output of a 200 HP V6. The 25-inch shaft must also match the boat’s transom height before the engines and propellers are selected.

• Counter-rotation supports listed port-side twin use
• Mechanical controls fit conventional rigging
• 200 HP suits approved offshore hulls

Applications & Use Cases

Honda BF200DXCRA is intended for port-side twin mechanical installations on offshore fishing boats and larger recreational hulls using 25-inch transoms. It can support offshore fishing, coastal cruising, and harbor travel when the vessel is approved for twin engines and the total installed weight remains within its limits.

• Twin offshore boats with X-long transoms
• Port-side mechanical counter-rotation installations
• Large recreational hulls requiring 200 HP

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for the 7.8 L oil capacity with filter, gearcase lubricant, filters, spark plugs, cooling-system inspection, mechanical controls, Power Trim & Tilt, and counter-rotation service. Confirm twin-engine rigging and warranty requirements before purchase.