Honda BF150DK1XCRA 150HP Outboard – 25in Shaft, Counter Rotation

Match the Honda BF150DK1XCRA 150HP Outboard to a twin-engine offshore boat that needs a 25-inch shaft, mechanical remote controls, and a port-side counter-rotation unit. Its 2,354 cc inline four-cylinder DOHC engine uses 16 valves and VTEC technology, delivering 150 HP at 5,500 RPM. Honda BF150DK1XCRA is a Signature Silver 4-stroke outboard with Programmed Fuel Injection, electric starting, remote mechanical control, and Power Trim & Tilt. The counter-rotation configuration is listed for twin mechanical installations.

The 485-lb dry weight should be considered when calculating total twin-engine weight, transom load, and boat balance. The 25-inch X-long shaft is intended for compatible taller transoms, while the 5,000–6,000 RPM full-throttle range helps guide propeller selection after rigging. A 40-amp alternator supplies 30 charging amps for supported marine electronics and accessories. Engine oil capacity is listed at 6.7 L with filter, while gearcase lubricant specifications and service intervals should be confirmed through the correct Honda documentation.

Honda BF150DK1XCRA Counter-Rotation 25-Inch Outboard for Mechanical Twins

• Use the 25-inch X-long shaft on boats built for compatible tall-transom installations.
• VTEC Powerhead — combines 2,354 cc displacement with a DOHC four-cylinder, 16-valve 4-stroke design.
• The port-side counter-rotation configuration is intended for listed twin mechanical-control applications.
• 485 lbs dry weight affects transom capacity, balance, trailer loading, and repower calculations.
• Programmed Fuel Injection manages fuel delivery within the supplied Honda engine configuration.
• Remote mechanical controls connect throttle and shifting to conventional helm rigging.
• Power Trim & Tilt adjusts engine position during acceleration, cruising, docking, and trailering.
• 40 amps total with 30 charging amps support compatible electrical equipment.

Reasons to Choose the Honda BF150DK1XCRA

The counter-rotation design gives this model a specific role in twin mechanical-control installations. It retains the familiar remote rigging arrangement while adding a 150 HP power option for properly rated offshore fishing boats. The 25-inch shaft also addresses the taller transom requirement identified for this configuration.

• Counter-rotation supports listed port-side twin setups
• Mechanical controls fit conventional cable rigging
• 150 HP suits approved offshore hulls

Applications & Use Cases

Honda BF150AK1XCRA is intended for port-side twin mechanical configurations on offshore fishing boats with compatible 25-inch transoms. It can support offshore fishing, coastal travel, harbor cruising, and recreational operation when the boat is designed for twin engines and the total installed weight remains within its approved limits.

• Offshore fishing boats with tall transoms
• Port-side twin mechanical installations
• Coastal cruising with remote controls

Warranty, Support & Maintenance

The supplied product information identifies a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for the 6.7 L oil capacity with filter, gearcase lubricant, filters, spark plugs, cooling-system checks, Power Trim & Tilt, and counter-rotation service. Confirm twin-engine rigging, warranty registration, dealer support, and regional coverage before installation.