Scag V-Ride II 61in 38.5HP Kawasaki EFI Stand-On Mower
Scag V-Ride II runs on 38.5 horsepower. A 61-inch deck backs it up, and a Kawasaki engine drives it. Standing position speeds mounting and dismounting on the job.
- 38.5 horsepower gives it real muscle
- The deck spans a full 61 inches
- A Kawasaki engine powers every pass
- EFI makes cold mornings easier to start
- Built ground-up as a stand-on mower
Description
The Scag V-Ride II 61in 38.5HP Kawasaki EFI stand-on mower solves commercial mowing route bottlenecks through 38.5 horsepower Big Block EFI power and heavy Parker hydraulic wheel drives. Commercial landscape contractors lose profit margins when operating smaller engines that struggle under heavy bagging attachments or dense wet grass. This flagship machine pairs an industrial 38.5HP Kawasaki FX1000V EFI engine with a Velocity Plus 7-gauge steel deck, sweeping through dense grass at forward transport speeds up to 10.5 MPH.
Electronic fuel injection optimizes fuel-air mixtures dynamically, reducing gasoline consumption while providing instant throttle response when cutting blades hit thick grass clumps. Heavy-duty dual 12cc hydraulic pumps and Parker wheel motors deliver positive steering response up to 10.5 MPH, while the 61-inch 7-gauge steel deck discharges grass clippings uniformly across wide commercial turf lanes. The coil-spring suspension platform keeps operators alert and comfortable through long eight-hour commercial cutting schedules.
Engine Architecture of Scag V-Ride II 61in 38.5HP EFI
- 38.5HP Kawasaki FX1000V EFI Engine: Massive 999cc commercial V-twin engine delivers unmatched power and electronic fuel injection efficiency.
- 61-Inch Velocity Plus 7-Gauge Deck: Built with welded plate steel and Tri-Plate spindle reinforcement to eliminate deck flexing.
- Dual 12cc Pumps & Parker Wheel Motors: Delivers massive wheel torque and responsive ground drive control up to 10.5 MPH.
- Coil-Spring Suspension Standing Platform: Features adjustable coil springs and elastomeric bumpers to eliminate operator back fatigue.
- Quick-Adjust Hand Deck Lift: Adjusts cut heights quickly across distinct quarter-inch increments from 1.5 to 4.5 inches.
- 8-Gallon Fuel Tank Capacity: Supplies huge fuel capacity to run all day without stopping to refill on commercial routes.
Commercial Utility Stamina & Lifespan
Engineered for high-volume commercial contractors, this 61-inch stand-on mower combines maximum horsepower with low operating overhead.
- Electronic fuel injection cuts fleet fuel expenses significantly compared to standard carbureted commercial mowers.
- A fabricated 61-inch 7-gauge deck covers up to 6 acres per hour, reducing labor hours and operator payroll on large mowing contracts.
- Stand-on operator positioning provides unobstructed forward visibility, allowing operators to trim around trees without neck strain.
Chassis Integration & Industrial Fitment
Requiring 65 inches of clearance with the heavy-duty discharge chute in the upright transport position, this machine clears wide corporate campuses and public parks rapidly while fitting standard landscape trailers.
Commercial Warranty & Field Maintenance
- Scag backs this V-Ride II commercial mower with a 2-Year limited commercial warranty covering structural components and deck integrity.
Service this mower by changing engine oil every 100 hours with 10W-30 oil, inspecting deck belts monthly for wear, and cleaning packed grass clippings from the deck underside after mowing wet lawns. Order the Scag V-Ride II 61in 38.5HP Kawasaki EFI stand-on mower from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.
Scag V-Ride II 61" Stand-On (38.5HP Kawasaki EFI) Specs
| Technical Parameter | Official Specification |
|---|---|
| Brand & Series | Scag V-Ride II Series |
| Full SKU/Model | SVRII-61V-38KAE (Kawasaki FX1000V EFI) |
| Country of Origin | USA |
| Engine Brand & Model | Kawasaki FX1000V EFI |
| Displacement (cc) | 999 cc |
| Horsepower/Torque | 38.5 HP at 3600 RPM |
| Fuel Capacity (Gallons/L) | 8.0 Gallons (30.3 L) |
| Oil Capacity & Recommended Grade | 2.3 qt (2.2 L) / SAE 10W-40 |
| Oil Filter OEM Part Number | Kawasaki 49065-7007 |
| Spark Plug Type & Gap | NGK BPR4ES / 0.030" |
| Air Filter Type | Heavy-Duty Canister Air Filter |
| Starting System | Electric Start (EFI System) |
| Transmission Model | Dual Hydro-Gear 12cc Pumps / Parker Wheel Motors |
| Transmission Oil Type | Scag Specialty Hydraulic Oil |
| Max Forward Speed (mph/kmh) | 10.5 mph (16.9 km/h) |
| Max Reverse Speed (mph/kmh) | 5.0 mph (8.0 km/h) |
| Cutting Width (Inches) | 61 Inches |
| Deck Construction (Gauge & Type) | Velocity Plus™ 7-Gauge Fabricated Steel |
| Cutting Height Range | 1.5" - 4.5" |
| Height Adjustment Positions | Manual Pin Adjust (1/4" increments) |
| Number of Blades | 3 Blades (Marbain® Steel) |
| Blade Tip Speed (fpm) | 19,000 fpm |
| Blade Bolt Torque (ft-lbs) | 75 ft-lbs |
| Spindle Housing Material | Heavy-Duty Cast-Iron |
| Front Tire Size | 12 x 6.5-6 (Flat-Free) |
| Rear Tire Size | 24 x 12-12 |
| Seat Type & Suspension | Extra-Thick Operator Pad w/ Coil Suspension |
| Dry Weight (lbs/kg) | 1135 lbs (515 kg) |
| Commercial/Residential Warranty | 2-Year Commercial / 3-Year Non-Comm |
| SEO Usage Profile (Terrain & Max Acreage) | Industrial Commercial; All-Day Operation; 10+ Acres |












Reviews
There are no reviews yet.