Scag V-Ride II 52in 23HP Kawasaki Stand-On Mower – Commercial
Scag V-Ride II answers with 23 horsepower. A 52-inch deck backs it up, and a Kawasaki engine drives it. Commercial-grade construction holds up to daily route use. Quick on and off keeps route crews moving.
- 23 horsepower gives it real muscle
- A 52-inch deck covers ground fast
- Commercial-grade parts built for daily runs
- Kawasaki builds the engine inside it
- Built ground-up as a stand-on mower
Description
Tackle tough commercial mowing routes with the Scag V-Ride II 52in 23HP Kawasaki commercial stand-on mower to experience commercial-grade hydraulic drive power and heavy-duty deck stamina. Operating on multi-acre corporate properties and municipal parks demands continuous full-throttle mowing that overheats light-duty residential machines. Scag equips this commercial machine with dual 12cc hydraulic pumps, Parker wheel motors, an expansive 52-inch fabricated Velocity Plus deck, and a commercial 23HP Kawasaki FX730V engine engineered to master rolling terrain at speeds up to 10.5 MPH.
Heavy-duty hydraulic pumps and Parker wheel motors deliver positive wheel torque up to 10.5 MPH forward transport speed without hydrostatic fluid breakdown. The deep 52-inch fabricated deck pulls air upward through the cutting chamber, discharging dense grass clippings uniformly across the lawn without windrowing. An adjustable coil-spring suspension platform isolates the operator from harsh ground bumps, ensuring comfortable all-day mowing across uneven acreage.
Engine Architecture of Scag V-Ride II 52in Kawasaki
- 52-Inch Velocity Plus 7-Gauge Deck: Features solid welded plate construction with reinforced leading edges to survive daily commercial abuse.
- 23HP Kawasaki FX730V Commercial Engine: Heavy-duty commercial V-twin engine supplies high torque displacement for tough mowing conditions.
- Dual Hydraulic Pumps & High-Torque Wheel Motors: Deliver smooth, responsive stand-on steering control up to 10.5 MPH forward transport speed.
- Coil-Spring Suspension Platform: Features adjustable coil springs and elastomeric bumpers to eliminate operator fatigue over rough ground.
- Scag Heavy-Duty Cast-Iron Spindles: Houses precision tapered roller bearings with top-accessible grease fittings for long service life.
- Quick-Adjust Hand Deck Lift: Adjusts cut heights from 1.5 to 4.5 inches across distinct positions with an easy-select pin.
Commercial Advantages & Heavy-Duty Build
Built for demanding commercial accounts, this stand-on mower provides rugged durability and serviceable hydraulic drives.
- Heavy-duty hydraulic drives deliver continuous fluid flow to keep wheel motors cool during summer operations.
- A massive 7-gauge steel deck shell withstands direct impacts with rocks and concrete curbs without bending or throwing blades out of alignment.
Property Clearance & Trailer Packing
Weighing 890 pounds dry with an operating width of 56 inches with the chute raised, this 52-inch machine clears wide commercial acreage fast and fits neatly onto standard landscape trailers.
Warranty Protection & Routine Upkeep
- Scag backs this V-Ride II commercial mower with a 2-Year limited commercial warranty covering the frame, deck, and drive hydraulics.
Change engine oil every 100 hours with 10W-30 oil, service hydraulic fluid and filters every 250 hours, and clean packed grass clippings from the deck underside after mowing wet lawns. Order the Scag V-Ride II 52in 23HP Kawasaki commercial stand-on mower from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.
Scag V-Ride II 52" Stand-On (23HP Kawasaki Carb) Specs
| Technical Parameter | Official Specification |
|---|---|
| Brand & Series | Scag V-Ride II Series |
| Full SKU/Model | SVRII-52V-23FX (Kawasaki FX691V) |
| Country of Origin | USA |
| Engine Brand & Model | Kawasaki FX691V (Commercial Grade) |
| Displacement (cc) | 726 cc |
| Horsepower/Torque | 23 HP at 3600 RPM |
| Fuel Capacity (Gallons/L) | 8.0 Gallons (30.3 L) |
| Oil Capacity & Recommended Grade | 2.1 qt (2.0 L) / SAE 10W-40 |
| Oil Filter OEM Part Number | Scag 486221 / Kawasaki 49065-7007 |
| Spark Plug Type & Gap | NGK BPR4ES / 0.030" |
| Air Filter Type | Heavy-Duty Canister Air Filter |
| Starting System | Electric Start |
| Transmission Model | Dual Hydro-Gear 12cc Pumps / Parker Wheel Motors |
| Transmission Oil Type | Scag 20W-50 Specialty Hydraulic Oil |
| Max Forward Speed (mph/kmh) | 10.5 mph (16.9 km/h) |
| Max Reverse Speed (mph/kmh) | 5.0 mph (8.0 km/h) |
| Cutting Width (Inches) | 52 Inches |
| Deck Construction (Gauge & Type) | Velocity Plus™ 7-Gauge Fabricated Steel |
| Cutting Height Range | 1.5" - 4.5" |
| Height Adjustment Positions | Manual Pin Adjust (1/4" increments) |
| Number of Blades | 3 Blades (Marbain® Steel) |
| Blade Tip Speed (fpm) | 19,000 fpm |
| Blade Bolt Torque (ft-lbs) | 75 ft-lbs |
| Spindle Housing Material | Heavy-Duty Cast-Iron |
| Front Tire Size | 12 x 6.5-6 (Flat-Free) |
| Rear Tire Size | 24 x 10.5-12 |
| Seat Type & Suspension | Extra-Thick Operator Pad w/ Coil Suspension |
| Dry Weight (lbs/kg) | 920 lbs (417 kg) |
| Commercial/Residential Warranty | 2-Year Commercial / 3-Year or 500-Hour Non-Comm |
| SEO Usage Profile (Terrain & Max Acreage) | Professional Commercial; Slope Stability; 5+ Acres |












Reviews
There are no reviews yet.