Hustler Super S 52in 29.5HP Kawasaki EFI Stand-On Mower
No guesswork, Hustler Super S packs 29.5 horsepower. A 52-inch deck backs it up, and a Kawasaki engine drives it. Standing position speeds mounting and dismounting on the job.
- Runs a strong 29.5 horsepower engine
- Cuts a wide 52-inch swath
- A Kawasaki engine powers every pass
- EFI makes cold mornings easier to start
- Built ground-up as a stand-on mower
Description
Commercial mowing contractors relying on the Hustler Super S 52in 29.5HP Kawasaki EFI stand-on mower eliminate carburetor gumming and sluggish throttle response on demanding corporate properties. Operating heavy cutting decks in overgrown grass puts intense continuous load resistance on engine crankshafts, which causes overheating and thrown connecting rods on consumer powerheads. Hustler equips this commercial machine with electronic fuel injection, an expansive 52-inch fabricated deck, and commercial Hydro-Gear ZT-3400 transaxles engineered to master rolling terrain at speeds up to 9 MPH.
Dual Hydro-Gear ZT-3400 commercial transaxles incorporate steel cut gears and charge pumps to maintain hydraulic line pressure during hot afternoon mowing. The deep deck profile pulls air upward through the cutting chamber, discharging dense grass clippings uniformly across the lawn without windrowing. An adjustable suspension operator platform isolates the operator from harsh ground bumps, ensuring comfortable all-day mowing across commercial acreage.
Core Mechanical Specifications of Hustler Super S 52in EFI
- 52-Inch Welded 10-Gauge Steel Deck: Delivers heavy plate steel construction with reinforced leading edges for extreme durability.
- 29.5HP Kawasaki FX850V EFI Engine: Electronic fuel injection optimizes fuel-air mixtures dynamically to maximize fuel economy.
- Hydro-Gear ZT-3400 Commercial Drives: Serviceable transaxles feature spin-on filters and 1-inch axle shafts for long durability.
- Vibration-Isolated Operator Standing Platform: Incorporates adjustable elastomeric dampers to eliminate operator knee and back fatigue.
- Quick-Adjust Hand Deck Lift: Adjusts cut heights across distinct positions from 1.5 to 5 inches with an easy-select pin.
- Foldable Operator Lean Pad: Contoured side bolsters keep operators stable and centered during steep hillside mowing.
- High-Capacity Dual Fuel Tanks: Supplies 7.3 gallons of fuel capacity to run all day without stopping to refill on commercial routes.
Contractor Benefits & Long-Term Reliability
This electric-start stand-on mower combines electronic fuel injection efficiency with rugged mechanical internals to keep commercial crews productive.
- Electronic fuel injection cuts fleet fuel expenses significantly compared to standard carbureted commercial mowers.
- Stand-on chassis design provides an unobstructed forward view, allowing operators to trim closer to trees and building walls.
Acreage Productivity & Deck Clearance
Covering up to 4.2 acres per hour at top forward speed, this 52-inch machine clears wide commercial lawn tracts while maneuvering through standard farm gates.
Factory Warranty Terms & Service Guidelines
- Hustler provides a 5-Year or 1,200-hour limited commercial warranty covering the chassis, cutting deck, and drive transaxles.
Perform engine oil changes every 100 hours with 10W-30 oil, inspect deck belts monthly for proper tension, and remove grass buildup from under the deck baffles after wet mowing. Order the Hustler Super S 52in 29.5HP Kawasaki EFI stand-on mower from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.
Hustler Super S 52" Stand-On (29.5HP Kawasaki EFI) Specs
| Technical Parameter | Official Specification |
|---|---|
| Brand & Series | Hustler Super S Series |
| Full SKU/Model | 941310 (Kawasaki FX850V EFI) |
| Country of Origin | USA |
| Engine Brand & Model | Kawasaki FX850V EFI (Commercial Grade) |
| Displacement (cc) | 852 cc |
| Horsepower/Torque | 29.5 HP at 3600 RPM |
| Fuel Capacity (Gallons/L) | 12.0 Gallons (45.4 L) |
| Oil Capacity & Recommended Grade | 2.1 qt (2.0 L) / SAE 10W-40 API CJ-4 |
| Oil Filter OEM Part Number | Kawasaki 49065-7007 |
| Spark Plug Type & Gap | NGK BPR4ES / 0.030" |
| Air Filter Type | Heavy-Duty Canister Air Filter |
| Starting System | Electric Start (Electronic Fuel Injection) |
| Transmission Model | Hydro-Gear ZT-3400 (Commercial) |
| Transmission Oil Type | 20W-50 Synthetic Motor Oil |
| Max Forward Speed (mph/kmh) | 9.0 mph (14.5 km/h) |
| Max Reverse Speed (mph/kmh) | N/A (Standard Drive) |
| Cutting Width (Inches) | 52 Inches |
| Deck Construction (Gauge & Type) | 7-Gauge Fabricated Steel |
| Cutting Height Range | 1.5" - 5.5" |
| Height Adjustment Positions | Hand-Adjust Lever |
| Number of Blades | 3 Blades |
| Blade Tip Speed (fpm) | 18,500 fpm |
| Blade Bolt Torque (ft-lbs) | 118 ft-lbs |
| Spindle Housing Material | Ductile Cast Iron |
| Front Tire Size | 13 x 6.5-6 (Semi-Pneumatic) |
| Rear Tire Size | 24 x 12-12 |
| Seat Type & Suspension | Ergonomic Stand-On Operator Platform |
| Dry Weight (lbs/kg) | 1115 lbs (506 kg) |
| Commercial/Residential Warranty | 5-Year / 1200-Hour Commercial |
| SEO Usage Profile (Terrain & Max Acreage) | Professional Commercial; Efficiency & Reliability; 6+ Acres |












Reviews
There are no reviews yet.