Hustler Super S 48in 22HP Kawasaki Stand-On Mower – Commercial
Hustler Super S answers with 22 horsepower. A 48-inch deck backs it up, and a Kawasaki engine drives it. Quick on and off keeps route crews moving. Commercial-grade construction holds up to daily route use.
- Puts 22 horsepower behind every pass
- Cuts a wide 48-inch swath
- Commercial-grade parts built for daily runs
- Kawasaki builds the engine inside it
- Runs as a true stand-on mower
Description
Cutting up to 3.8 acres per hour, the Hustler Super S 48in 22HP Kawasaki stand-on mower powers through dense commercial turf without engine hesitation. Commercial mowing contractors face lost profits when large zero-turn mowers cannot access tight residential gates, forcing crews to push slow walk-behind mowers that burn billable hours. This 48-inch commercial machine combines a heavy welded 10-gauge steel deck with an aggressive 22HP Kawasaki FX691V commercial engine, maintaining high blade tip speed at forward transport speeds up to 9 MPH.
Hydro-Gear ZT-3400 commercial transaxles provide responsive ground drive control, tracking straight along property perimeters and pivoting around tight landscaping borders. The deep fabricated deck structure generates high airflow velocity that stands limp grass upright, dispersing fine clippings uniformly across the lawn. Operators remain supported across long cutting shifts thanks to an isolated operator platform mounted on vibration-absorbing rubber dampers.
Key Engineering Features of Hustler Super S 48in
- 48-Inch Welded 10-Gauge Steel Deck: Features solid welded plate construction with reinforced leading edges to survive curb scrapes.
- 22HP Kawasaki FX691V Commercial Engine: Heavy-duty commercial V-twin engine supplies high torque displacement for tough mowing conditions.
- Hydro-Gear ZT-3400 Commercial Transaxles: Features external spin-on filters and 1-inch axle shafts for smooth 9 MPH travel.
- Vibration-Isolated Operator Platform: Cushions the operator with elastomeric damping to eliminate fatigue over rough ground.
- Quick-Adjust Hand Deck Lift: Adjusts cut heights from 1.5 to 5 inches across distinct positions with an easy-select pin.
- Heavy-Duty Front Caster Forks: Formed steel forks house smooth-rolling pneumatic tires to absorb impact shocks from rough ground.
Field Durability & Operational Economy
Built for professional lawn care contractors, this stand-on commercial mower delivers aggressive cutting speed with low maintenance overhead.
- A heavy welded steel chassis resists twisting when driving across ditch banks and sloped embankments.
- Commercial-grade Hydro-Gear ZT-3400 transaxles feature external oil filters to simplify scheduled fleet maintenance in the shop.
- Stand-on operator positioning provides unobstructed forward visibility, allowing operators to trim around trees without neck strain.
Trailer Transport & Property Maneuverability
With an overall deck width of 52 inches with the rubber discharge chute upright, this unit fits easily on standard commercial landscape trailers, streamlining transport between customer properties.
Warranty Coverage & Field Maintenance
- Commercial fleet operators receive 5-Year or 1,200-hour limited commercial warranty coverage against structural and transaxle defects.
- The commercial Kawasaki engine receives full 3-Year manufacturer warranty backing through authorized dealer service centers nationwide.
Change engine oil after the initial 20 operating hours, then service every 100 hours with 10W-30 motor oil. Inspect the air filter cartridge monthly, check transaxle fluid levels annually, and sharpen blades regularly for clean cuts. Order the Hustler Super S 48in 22HP Kawasaki commercial stand-on mower from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.
Hustler Super S 48" Stand-On (22HP Kawasaki) Specs
| Technical Parameter | Official Specification |
|---|---|
| Brand & Series | Hustler Super S Series |
| Full SKU/Model | 940296 (Kawasaki FX) |
| Country of Origin | USA |
| Engine Brand & Model | Kawasaki FX691V (Commercial Grade) |
| Displacement (cc) | 726 cc |
| Horsepower/Torque | 22 HP at 3600 RPM |
| Fuel Capacity (Gallons/L) | 6.5 Gallons (24.6 L) |
| Oil Capacity & Recommended Grade | 2.2 qt (2.1 L) / SAE 10W-40 API CJ-4 |
| Oil Filter OEM Part Number | Kawasaki 49065-7007 |
| Spark Plug Type & Gap | NGK BPR4ES / 0.030" |
| Air Filter Type | Heavy-Duty Canister Air Filter |
| Starting System | Electric Start |
| Transmission Model | Hydro-Gear ZT-3400 (Commercial) |
| Transmission Oil Type | 20W-50 Synthetic Motor Oil |
| Max Forward Speed (mph/kmh) | 9.0 mph (14.5 km/h) |
| Max Reverse Speed (mph/kmh) | N/A (Standard Drive) |
| Cutting Width (Inches) | 48 Inches |
| Deck Construction (Gauge & Type) | 7-Gauge Fabricated Steel |
| Cutting Height Range | 1.5" - 5.5" |
| Height Adjustment Positions | Hand-Adjust Lever |
| Number of Blades | 3 Blades |
| Blade Tip Speed (fpm) | 18,600 fpm |
| Blade Bolt Torque (ft-lbs) | 118 ft-lbs |
| Spindle Housing Material | Ductile Cast Iron |
| Front Tire Size | 11 x 4-5 (Semi-Pneumatic) |
| Rear Tire Size | 20 x 10-10 |
| Seat Type & Suspension | Ergonomic Stand-On Operator Platform |
| Dry Weight (lbs/kg) | 915 lbs (415 kg) |
| Commercial/Residential Warranty | 5-Year / 1200-Hour Commercial |
| SEO Usage Profile (Terrain & Max Acreage) | Professional Commercial; Tight Spaces; 5+ Acres |












Reviews
There are no reviews yet.