Gravely Pro-Turn 560 60in 29.5HP Kawasaki EFI Zero Turn Mower – Commercial
Gravely Pro-Turn 560 carries 29.5 horsepower. A 60-inch deck backs it up, and a Kawasaki engine drives it. Commercial-grade construction holds up to daily route use. Tight turning keeps trim work to a minimum.
- Runs a strong 29.5 horsepower engine
- 60 inches wide, fewer passes needed
- Commercial-grade parts built for daily runs
- Kawasaki builds the engine inside it
- EFI makes cold mornings easier to start
Description
During continuous 8-hour municipal mowing shifts, the Gravely Pro-Turn 560 29.5HP Kawasaki EFI commercial zero turn mower delivers uninterrupted 13 MPH cutting speed across dense parkland turf. Commercial grounds crews face severe heat and heavy grass resistance that overheats standard zero-turn transmissions and burns deck belts. This heavy commercial workhorse incorporates an X-Factor III 7-gauge fabricated steel deck, Parker HTG unitized hydraulic drives, and an electronic fuel-injected 29.5HP Kawasaki engine engineered for heavy duty cycles.
Parker HTG commercial hydraulic transmissions feature large displacement pumps and high-torque wheel motors, producing smooth drive control up to 13 MPH without hydrostatic fluid breakdown. The deep 7-gauge X-Factor III deck generates massive vacuum lift that pulls heavy, wet grass upright before the cutting blades strike. A full air-ride suspension seat absorbs severe ground shocks, protecting the operator across rough pasture terrain and highway shoulders.
Technical Features of Gravely Pro-Turn 560 29.5HP EFI
- 60-Inch X-Factor III 7-Gauge Steel Deck: Industrial plate steel shell with 1.75-inch blade overlap eliminates uncut grass ribbons on turns.
- 29.5HP Kawasaki FX850V EFI Engine: Electronic fuel injection optimizes fuel-air mixtures dynamically to maximize fuel economy.
- Parker HTG Commercial Transmissions: Industrial unitized drives deliver exceptional wheel torque up to 13 MPH forward speed.
- Pneumatic Air-Ride Suspension Seat: Cushions the operator with adjustable air pressure damping to eliminate physical fatigue over rough ground.
- High-Speed 18,500 FPM Blade Tip Speed: Slices cleanly through dense brush and tall weeds without ragged turf edges.
Heavy-Duty Architecture & Low Maintenance
Designed for demanding commercial highway and municipal operations, this industrial zero-turn mower provides unmatched chassis strength.
- A massive 7-gauge steel deck shell withstands direct impacts with road debris, concrete survey stakes, and hidden rocks without cracking.
- Parker HTG unitized hydraulic drives eliminate external hydraulic hoses, reducing leak points and routine shop maintenance.
- Electronic fuel injection cuts fleet fuel expenses significantly compared to standard carbureted commercial mowers.
Equipment Integration & Fitment Specs
Weighing 1,385 pounds dry with an industry-standard 64-inch transport width with the chute raised, this heavy commercial machine fits commercial landscape trailers with heavy loading ramps.
Commercial Coverage & Maintenance Upkeep
- Gravely backs this Pro-Turn 500 commercial mower with a 5-Year or 1,500-hour limited commercial warranty covering the frame, deck, and drive hydraulics.
Service this engine with fresh 10W-30 motor oil and a new filter every 100 operating hours. Tap clean the heavy-duty canister air cleaner weekly on dusty highway routes, and maintain the spark plug electrode gap at 0.030 inches. Order the Gravely Pro-Turn 560 29.5HP Kawasaki EFI commercial zero turn mower from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.
Gravely Compact Pro 34" Zero Turn (15.5HP Kawasaki) Specs
| Technical Parameter | Official Specification |
|---|---|
| Brand & Series | Gravely Compact Pro Series |
| Full SKU/Model | 991144 (Kawasaki FX481V) |
| Country of Origin | USA |
| Engine Brand & Model | Kawasaki FX481V (Commercial Grade) |
| Displacement (cc) | 603 cc |
| Horsepower/Torque | 15.5 HP at 3600 RPM |
| Fuel Capacity (Gallons/L) | 7.3 Gallons (27.6 L) |
| Oil Capacity & Recommended Grade | 1.8 qt (1.7 L) / SAE 10W-40 |
| Oil Filter OEM Part Number | Kawasaki 49065-7007 |
| Spark Plug Type & Gap | NGK BPR4ES / 0.030" |
| Air Filter Type | Heavy-Duty Canister Air Filter |
| Starting System | Electric Start |
| Transmission Model | Hydro-Gear ZT-3100 (Serviceable) |
| Transmission Oil Type | 20W-50 Synthetic Motor Oil |
| Max Forward Speed (mph/kmh) | 9.0 mph (14.5 km/h) |
| Max Reverse Speed (mph/kmh) | 4.0 mph (6.4 km/h) |
| Cutting Width (Inches) | 34 Inches |
| Deck Construction (Gauge & Type) | 7-Gauge Fabricated Steel |
| Cutting Height Range | 1.0" - 5.0" |
| Height Adjustment Positions | 9 Positions |
| Number of Blades | 2 Blades |
| Blade Tip Speed (fpm) | 18,000 fpm |
| Blade Bolt Torque (ft-lbs) | 115 ft-lbs |
| Spindle Housing Material | Forged Aluminum |
| Front Tire Size | 11 x 4-5 (Semi-Pneumatic) |
| Rear Tire Size | 18 x 10.5-10 |
| Seat Type & Suspension | High-Back w/ Armrests & Springs |
| Dry Weight (lbs/kg) | 711 lbs (322 kg) |
| Commercial/Residential Warranty | 2-Year Commercial Limited |
| SEO Usage Profile (Terrain & Max Acreage) | Professional Commercial; 36" Gates; Up to 2 Acres |












Reviews
There are no reviews yet.