Gravely Pro-Stance 48in 23.5HP Kawasaki Stand-On Mower – Commercial
Gravely Pro-Stance turns out 23.5 horsepower. A 48-inch deck backs it up, and a Kawasaki engine drives it. Commercial-grade construction holds up to daily route use. Standing position speeds mounting and dismounting on the job.
- Rated for 23.5 horsepower on demand
- 48 inches wide, fewer passes needed
- Commercial-grade parts built for daily runs
- Power comes from a trusted Kawasaki engine
- Built ground-up as a stand-on mower
Description
Need to upgrade commercial turf productivity on rolling acreage? The Gravely Pro-Stance 48in 23.5HP Kawasaki commercial stand-on mower provides an ultra-low center of gravity and massive 23.5 horsepower to master rolling hills and rough commercial acreage. Traditional zero-turn mowers can lose front-wheel traction on steep drainage swales, requiring operators to slow down to prevent sliding. This 48-inch stand-on machine positions operator weight directly over the drive wheels, maintaining firm turf grip while mowing across hillsides at speeds up to 9 MPH.
A commercial 23.5HP Kawasaki FX730V V-twin engine delivers massive combustion torque to drive three cutting blades through dense spring grass without engine bog. Heavy-duty Hydro-Gear ZT-3400 commercial transaxles deliver positive steering response, while the 48-inch X-Factor II 7-gauge steel deck discharges grass clippings uniformly across wide commercial turf lanes. The quick-adjust hand height selector allows on-the-fly deck adjustments from 1.5 to 5 inches across fifteen distinct positions.
Core Mechanical Specifications of Gravely Pro-Stance 48in
- 48-Inch X-Factor II 7-Gauge Steel Deck: Built with one-piece 7-gauge steel plate to provide superior cutting deck stiffness and airflow.
- 23.5HP Kawasaki FX730V Commercial Engine: Heavy-duty commercial V-twin engine supplies high torque displacement for tough mowing conditions.
- Hydro-Gear ZT-3400 Commercial Transaxles: Delivers massive wheel torque and responsive ground drive control up to 9 MPH.
- Vibration-Isolated Operator Platform: Suspended platform cushions the operator against ground shocks to eliminate fatigue.
- Heavy-Duty Cast-Iron Spindles: Houses precision bearings to dissipate heat rapidly during full-throttle commercial operation.
- Heavy Welded Tubular Steel Frame: Resists chassis flex when navigating steep highway embankments and drainage ditches.
- Large 20-Inch Rear Drive Tires: Wide drive tires distribute machine weight to prevent lawn compaction and wheel rutting on wet sod.
Mechanical Advantages for Commercial Fleets
This stand-on commercial machine delivers exceptional hillside stability and low operating expenses across demanding contractor routes.
- Stand-on chassis design provides an unobstructed forward view, allowing operators to trim closer to trees and building walls.
- Commercial-grade Hydro-Gear ZT-3400 transaxles feature external oil filters to simplify scheduled fleet maintenance in the shop.
Turf Navigation & High-Speed Clearing
Covering up to 4 acres per hour at 9 MPH top forward speed, this 48-inch machine clears commercial business parks fast and requires 52 inches of trailer width with the chute raised.
Factory Warranty Protection & Service Care
- Commercial turf operators receive 5-Year or 1,000-hour limited commercial warranty coverage on the chassis, cutting deck, and drive transaxles.
- The commercial engine receives full 3-Year manufacturer warranty backing through authorized service dealer networks nationwide.
Change engine oil every 100 operating hours with 10W-30 oil, inspect transaxle fluid levels monthly, and sharpen blades regularly for clean turf cuts. Order the Gravely Pro-Stance 48in 23.5HP Kawasaki commercial stand-on mower from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.
Gravely Pro-Stance 48" Stand-On (23.5HP Kawasaki) Specs
| Technical Parameter | Official Specification |
|---|---|
| Brand & Series | Gravely Pro-Stance Series |
| Full SKU/Model | 994161 (Kawasaki FX730V) |
| Country of Origin | USA |
| Engine Brand & Model | Kawasaki FX730V (Commercial Grade) |
| Displacement (cc) | 726 cc |
| Horsepower/Torque | 23.5 HP at 3600 RPM |
| Fuel Capacity (Gallons/L) | 9.0 Gallons (34.1 L) |
| Oil Capacity & Recommended Grade | 2.1 qt (2.0 L) / SAE 10W-40 |
| Oil Filter OEM Part Number | Kawasaki 49065-7007 |
| Spark Plug Type & Gap | NGK BPR4ES / 0.030" |
| Air Filter Type | Heavy-Duty Canister Air Filter |
| Starting System | Electric Start |
| Transmission Model | Hydro-Gear ZT-3400 (Commercial) |
| Transmission Oil Type | 20W-50 Synthetic Motor Oil |
| Max Forward Speed (mph/kmh) | 9.0 mph (14.5 km/h) |
| Max Reverse Speed (mph/kmh) | 4.0 mph (6.4 km/h) |
| Cutting Width (Inches) | 48 Inches |
| Deck Construction (Gauge & Type) | 7-Gauge Fabricated X-Factor® III |
| Cutting Height Range | 1.5" - 5.0" |
| Height Adjustment Positions | 15 Positions |
| Number of Blades | 3 Blades |
| Blade Tip Speed (fpm) | 18,000 fpm |
| Blade Bolt Torque (ft-lbs) | 115 ft-lbs |
| Spindle Housing Material | Forged Aluminum |
| Front Tire Size | 13 x 6.5-6 (Semi-Pneumatic) |
| Rear Tire Size | 20 x 10.5-12 |
| Seat Type & Suspension | Premium Flip-up Suspension Platform |
| Dry Weight (lbs/kg) | 1040 lbs (471 kg) |
| Commercial/Residential Warranty | 5-Year / 1500-Hour Commercial |
| SEO Usage Profile (Terrain & Max Acreage) | Professional Commercial; Mid-Size Productivity; 5+ Acres |












Reviews
There are no reviews yet.