Cub Cadet Ultima ZTS2 60in Zero Turn Mower – Steering Wheel
Cub Cadet Ultima ZTS2 covers ground with a 60-inch deck. Tight turning keeps trim work to a minimum. Zero-radius turns cut mowing time around trees and beds. It starts reliably.
- A 60-inch deck covers ground fast
- Built ground-up as a zero turn mower
- Also comes with steering wheel built in
- Zero-radius turns save time on trim work
- It's backed by a standard mower warranty
Description
Displacing high combustion volume through a commercial V-twin block, the Cub Cadet Ultima ZTS2 60in steering wheel zero turn mower sustains maximum mowing productivity across rolling rural properties. Expansive hillside fields and large country estates demand wide cutting swaths that finish multi-acre jobs fast without sliding out on grades. This machine pairs an expansive 60-inch fabricated 11-gauge AeroForce steel deck with Synchro-Steer four-wheel steering and commercial Hydro-Gear ZT-2800 transaxles, producing clean turf striping on slopes up to 20 degrees.
The steering wheel directs the front wheels while independently regulating the rear hydrostatic wheel motors, giving operators precise directional control around ponds, trees, and fence perimeters. The fully welded continuous 2-inch tubular steel chassis absorbs ground vibration, preserving deck pitch and cutting level across rolling acreage. Operators remain supported across long cutting shifts thanks to a plush high-back seat equipped with padded armrests that dampen rough terrain shocks.
Technical Specifications of Cub Cadet Ultima ZTS2 60in
- 60-Inch Fabricated 11-Gauge AeroForce Deck: Welded three-blade steel plate deck provides wide acreage coverage and maximum discharge velocity.
- High-Torque Commercial V-Twin Engine: Supplies dependable combustion pressure to power through dense turf without RPM fade.
- Synchro-Steer Four-Wheel Drive System: Directs front wheel angles while modulating rear drive motors for unyielding slope stability.
- Hydro-Gear ZT-2800 Commercial Drives: Serviceable transaxles feature spin-on filters and 1-inch axle shafts for long durability.
- Foot-Assisted Mechanical Deck Lift: Makes raising the heavy 60-inch deck effortless when clearing obstacles and gravel drives.
Jobsite Performance & Wear Resistance
Built for large hillside properties and rural facilities, this 60-inch machine offers exceptional acres-per-hour output and chassis durability.
- A fabricated 60-inch 11-gauge deck covers up to 4.5 acres per hour, reducing seat time on large mowing assignments.
- Synchro-Steer technology eliminates turf gouging on tight turns by driving all four wheels in harmony through every pivot.
- Serviceable Hydro-Gear ZT-2800 transaxles permit routine oil and filter servicing, preventing costly transmission replacements.
- Wide rear turf tires provide dependable traction on slopes without leaving wheel burn marks on damp lawns.
Trailer Transport & Gate Clearance
With an overall deck width of 64 inches with the rubber discharge chute upright, this wide machine fits easily on standard commercial landscape trailers, streamlining transport between distant acreage properties.
Commercial Warranty & Preventive Maintenance
- Cub Cadet backs this mower with a 3-Year limited residential warranty covering the deck, frame, and transaxles.
- The V-twin engine receives 3-Year manufacturer warranty backing through authorized dealer service centers nationwide.
Change engine oil after the initial 20 operating hours, then service every 50 hours with 10W-30 motor oil. Inspect the air filter cartridge monthly, check drive tire pressure at 12 PSI, and sharpen blades regularly for clean cuts. Order the Cub Cadet Ultima ZTS2 60in zero turn mower from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.
Cub Cadet Ultima ZTS2 60 Specs
| Brand | Cub Cadet |
| Full SKU/Model Number | ZTS2 60 |
| Country of Origin | USA |
| Power Source | Gas |
| Drive System | Zero-Turn (Synchro-Steer / HG-ZT2800) |
| Engine/Motor Brand & Model | Kohler 7000 Series PRO V-Twin |
| Displacement/Voltage | 747cc |
| Cutting Width | 60 Inches |
| Cutting Height Range | 1.0 - 4.5 Inches |
| Deck Construction | 11-Gauge Fabricated Steel (AeroForce) |
| Number of Blades | 3 |
| Discharge Options | Side Discharge (Mulch/Bag Optional) |
| Bag/Collection Capacity | Optional Accessory |
| Fuel/Energy Capacity | 3.5 Gallons |
| Tire Dimensions | 13"x6" Front / 20"x12" Rear |
| Starting System | Electric |
| Unit Weight | 720 lbs |
| Est. Noise Level | 100-104 dB |
| Commercial/Residential Warranty | 3-Year Unlimited Hour / Lifetime Frame |
| Primary Application | Heavy Slopes & Large Acreage, 4+ Acres |












Reviews
There are no reviews yet.