Phasor K3-14.0kW Marine Diesel Generator – 1800 RPM, Standard Series

Description

Maintain continuous vessel air conditioning compressor operation using the Phasor K3-14.0kW Marine Diesel Generator, delivering 14kW continuous electrical power for commercial charter yachts, offshore fishing craft, and liveaboard cruisers. Powered by a Kubota four-stroke diesel engine at 1800 RPM, it feeds whole-vessel distribution panels. It maintains cold-food safety through extended outages while handling high motor inrush loads without frequency drift.

Heavy-duty steel channel construction forms a rigid mounting platform, isolating vibration from the vessel hull via four elastomeric dampeners. The Kubota liquid-cooled diesel engine features a cast-iron cylinder sleeve, pressure lubrication, and a gear-driven seawater pump for continuous duty. Dry unladen weight measures 650 lbs within outer dimensions of 38 inches long by 21 inches wide by 25 inches high. This Phasor standard series marine generator incorporates a cupronickel tube-and-shell heat exchanger that resists saltwater corrosion.

Key Features of Phasor K3-14.0kW

Vessel operators buy Phasor K3-14.0kW commercial power equipment to supply reliable 120V and 240V power across extended ocean crossings. Slow-turning eighteen-hundred RPM architecture cuts fuel consumption and lowers engine room heat output.

• 14kW continuous running wattage drives multiple commercial walk-in refrigeration racks and exhaust hoods simultaneously.
• Kubota multi-cylinder diesel engine delivers steady mechanical torque under demanding catering workloads.
• 1800 RPM low-speed operation reduces mechanical stress and acoustic emissions compared to high-speed alternators.
• Brushless synchronous alternator eliminates brush maintenance while providing clean sine wave current.
• Cupronickel heat exchanger protects cooling circuits from destructive saltwater corrosion.
• Remote digital instrument panel tracks oil pressure, coolant temperature, AC volts, and frequency.
• Emergency automatic shutdown circuits protect this Phasor K3-14.0kW marine generator from thermal damage.

Brushless Alternator Current Stability

Featuring a heavy-duty copper-wound stator, this Phasor K3-14.0kW marine generator produces stable 120V and 240V power under intense inductive demands. Sound levels measure 64 dB(A) at 23 feet inside engine compartments. The solid-state voltage regulator dampens voltage sags during simultaneous starts of air conditioning compressors and galley refrigeration units, keeping electrical frequency locked at 60 Hz without phase hunting.

Engine Stringer Fitment Exhaust Integration

Secure the mounting base to vessel hull stringers maintaining at least 5 inches of perimeter clearance around the oil filter and seawater pump for routine servicing. Connect the raw-water intake through an approved bronze seacock and sea strainer basket. Run output conductors into the shipboard AC transfer panel using tinned marine-grade multi-conductor wire.

Remote Operation Safety Servicing Protocols

The bridge remote panel provides push-button starting and preheat control, eliminating manual cranking in cramped bilges. This marine diesel generator is NOT engineered for unventilated dry-box compartments without raw-water cooling circulation, outdoor open deck mounting, or raw gasoline fuel systems.

• Check seawater pump rubber impellers and clear intake strainers every 50 runtime hours.
• Replace engine crankcase motor oil and the spin-on filter every 100 runtime hours.
• Inspect the heat exchanger sacrificial zinc anode for corrosion loss every 250 runtime hours.

Factory Marine Warranty Crate Inventory

This Phasor standard series marine generator comes backed by a 5-Year limited warranty covering the Kubota engine, marine alternator, and cooling system. The wooden shipping crate holds the generator unit, remote gauge panel, connection harness, flexible fuel lines, and certified factory test documentation.