Fischer Panda AGT 3.2kW Marine Generator (ID 18051)
Charge deep marine battery banks through the Fischer Panda AGT Marine Generator, delivering 3.2kW of automated DC current through a water-cooled diesel core for off-grid yacht battery restoration.
- 3.2kW DC output recharges battery banks
- Automatic start feature monitors bank voltage
- Water-cooled diesel engine fits shallow bilges
- Acoustic sound capsule minimizes hull resonance
- Direct DC generation skips inverter loss
Description
Charge high-capacity commercial vessel battery banks using the Fischer Panda AGT 3.2kW Marine Generator, an Advanced Generator Technology DC power plant designed for off-grid maritime autonomy. Delivering 3.2 kW continuous direct current at 12V, 24V, or 48V configurations, this specialized marine generator rapidly charges lithium and AGM battery banks without AC inverter conversion losses.
Housed inside a compact fiberglass sound capsule, this unit pairs a single-cylinder 298cc Farymann diesel engine with a permanent magnet DC alternator. Heavy 100 percent copper stator coils transfer waste heat into an integrated water jacket rather than engine room air. Weighing 187 lbs dry, this compact DC generator features exterior chassis measurements of 21.6 inches long by 16.5 inches wide by 20.8 inches high.
Key Features of Fischer Panda AGT 3.2kW
Naval architects who buy Fischer Panda AGT 3.2kW marine generator hardware gain dedicated DC battery charging efficiency for hybrid vessel electrical systems. The automatic generator technology monitors vessel battery bank voltage, automatically starting the diesel motor when battery storage levels drop below programmed operational thresholds.
- 3.2 kW continuous DC charging power delivers high-amperage current straight into vessel battery banks without inverter losses.
- Direct current output configurations available in 12V, 24V, or 48V match any commercial maritime battery bank design.
- Automated start-stop programming starts the diesel motor when battery banks reach low voltage thresholds.
- AGT 3.2kW marine charging architecture eliminates wasteful AC-to-DC conversion stages to maximize fuel efficiency.
- Full water-jacket cooling keeps machinery spaces cool by routing thermal energy out through marine wet exhausts.
- Sound-insulating fiberglass capsule suppresses mechanical engine clatter to a quiet 52 dB(A) at 23 feet.
- Brushless permanent magnet alternator eliminates mechanical commutator wear for prolonged maintenance-free runs.
- Emergency automatic shutdown circuits protect the engine against overheating, low oil pressure, or cooling loss.
DC Voltage Stability Fuel Economy
Operating inside its sound shield, this unit produces 52 dB(A) at 23 feet, allowing quiet automatic battery charging cycles at anchor. The integrated multi-stage charging regulator adjusts charging current based on battery state of charge, preventing battery overcharging and plate degradation. Consuming 0.24 GPH of diesel at full output, this DC charging unit optimizes fuel energy conversion into stored battery reserves.
Hull Positioning Battery Cable Routing
Install the generator on level hull beds close to main battery compartments, maintaining 10 inches of service space around capsule panels. Route heavy-gauge DC welding cables with inline Class T marine fuses to minimize voltage drop between alternator terminals and battery busbars. The chassis utilizes an isolated ground return to prevent stray current corrosion across hull fittings.
Physical Accessibility Preventative Maintenance Schedule
Quick-release exterior sound shield latches allow tool-free panel removal for checking fluid levels and belt tension. This DC marine generator is not engineered for direct alternating current distribution without external house battery inverters, nor for operation in dry land settings without sea water cooling.
- Check sea strainer baskets and inspect crankcase oil levels before each shift.
- Drain engine crankcase oil and replace spin-on oil filter elements every 100 runtime hours.
- Examine raw-water pump impellers and inspect terminal cable torque every 250 runtime hours.
Factory Warranty Crate Shipping Manifest
Fischer Panda includes a 2-Year limited marine warranty protecting engine internals, the permanent magnet DC alternator, and charging controllers. The factory freight shipment includes the Fischer Panda AGT 3.2kW generator core, automatic battery monitor panel, external fuel pump, oil drain hose kit, and technical installation manual.












Reviews
There are no reviews yet.