Fischer Panda 8000x Marine Generator

Description

Dual-circuit freshwater heat exchangers protect the Fischer Panda 8000x Marine Generator, ensuring exceptional corrosion resistance and steady electrical power for commercial workboats and offshore cruisers. Operating at a fixed 3600 RPM speed, this generator supplies 6.8 kW continuous output and 8.0 kVA surge capacity at 120V and 240V 60Hz to power vital shipboard galley and refrigeration systems.

Constructed inside a heavy-duty fiberglass sound insulation capsule, this generator utilizes a twin-cylinder 479cc Kubota Z482 diesel engine. Its asynchronous water-cooled alternator features 100 percent copper windings wrapped in a cooling jacket to eliminate hot air discharge into vessel engine rooms. Weighing 326 lbs dry, the chassis envelope measures 26.0 inches long by 17.7 inches wide by 23.2 inches high.

Key Features of Fischer Panda 8000x

Commercial captains who buy Fischer Panda 8000x marine generator units secure durable fixed-speed power engineered for severe offshore marine environments. The direct freshwater cooling system encompasses both the engine block and alternator stator, eliminating noisy engine room ventilation fans.

• 6.8 kW continuous electrical output powers galley cooktops, water heaters, and vessel battery chargers on long runs.
• 8.0 kVA surge capacity starts inductive marine air conditioning pumps and deep freezer compressors without stalling.
• Asynchronous brushless alternator design eliminates carbon brushes and slip rings to reduce maintenance requirements.
• Direct water cooling circulates freshwater through alternator windings to prevent hot air release into vessel machinery spaces.
• 8000x commercial marine construction utilizes cast-iron cylinder liners for extended engine operational life.
• Three-D fiberglass sound capsule drops mechanical engine noise to 54 dB(A) measured at 23 feet.
• Freshwater heat exchanger with cupronickel tubes prevents saltwater erosion across long oceanic voyages.
• Automated emergency safety sensors shut down fuel delivery upon high engine coolant temperature or low oil pressure.

Inductive Surge Limits Operating Decibels

Emitting 54 dB(A) at 23 feet inside its sealed sound enclosure, this diesel generator prevents noise fatigue across crew rest quarters. An integrated automatic voltage control maintains output voltage within 3 percent of 120V and 240V standards, preventing current drops during heavy compressor motor startup cycles. Operating at half load, the diesel engine burns 0.48 GPH, providing dependable and economical electrical power.

Engine Bed Fitment Exhaust Plumbing

Install the generator on rigid structural stringers above bilge flood lines, leaving 10 inches of service clearance around capsule panels. Connect raw water supply through a dedicated 0.75-inch bronze seacock with an inline sea strainer. Grounding circuits link to vessel bonding buses through isolated ground returns to prevent galvanic zinc loss.

Vessel Ergonomics Scheduled Maintenance Schedule

Quick-release rubber latches allow rapid capsule panel removal to inspect oil level and fuel priming bulbs. This fixed-speed generator is not engineered for dry land operation without raw seawater cooling, nor for high-frequency telecommunications equipment requiring pure sine wave harmonic distortion under 1 percent.

• Inspect sea strainer baskets and raw-water pump drive belts before each shift.
• Renew engine oil and replace primary fuel filters every 100 runtime hours.
• Inspect zinc anodes and check alternator insulation resistance every 250 runtime hours.

Warranty Statement Factory Packaging Details

Fischer Panda backs this unit with a 2-Year limited warranty covering mechanical engine components, cooling heat exchangers, and electrical alternator stators. The delivery shipment contains the Fischer Panda 8000x core, remote start panel, external fuel pump, oil drain system, anti-vibration mount set, and factory pre-delivery inspection documentation.