Fischer Panda 5000i Marine Generator

Description

Battling noisy nighttime yacht battery charging cycles? The Fischer Panda 5000i Marine Generator eliminates annoying engine roar through advanced variable speed inverter engineering. Generating 4.0 kW continuous output and 5.0 kVA surge power at 120V 60Hz, this lightweight diesel unit powers onboard battery inverter chargers, galley appliances, and cabin air handlers quietly at sea.

An enclosed fiberglass sound capsule houses a single-cylinder 309cc diesel engine connected to a water-cooled permanent magnet alternator. Pure copper windings ensure maximum conductivity and resistance to thermal degradation during continuous battery charging runs. Weighing 165 lbs dry, this ultra-lightweight power unit occupies an exterior perimeter measuring 20.5 inches long by 17.3 inches wide by 20.7 inches high.

Key Features of Fischer Panda 5000i

Yacht owners who buy Fischer Panda 5000i marine generator models obtain quiet auxiliary power designed for luxury cruising vessels and commercial patrol craft. Its variable speed control allows the motor to idle down during low-load battery absorption stages, slashing fuel burn and exhaust smell at anchor.

• 4.0 kW rated electrical output delivers continuous power for watermakers, water heaters, and galley equipment.
• 5.0 kVA surge capacity handles momentary locked-rotor starting current from marine air conditioning pumps.
• Under 2 percent total harmonic distortion protects computerized battery chargers and yacht navigation displays.
• Variable motor speed from 2200 RPM to 2800 RPM minimizes engine hours and fuel consumption across night shifts.
• 5000i variable speed inverter electronics provide clean utility grade sine wave electricity without frequency drift.
• Full water-jacket cooling dissipates alternator and cylinder heat into raw seawater through a bronze heat exchanger.
• Lightweight 165-lb chassis fits into narrow lazarettes and under-cockpit lockers on sailing catamarans.
• Automated engine shutdown protections guard against cooling failure, high exhaust temperature, or low oil pressure.

Sine Wave Distortion Low Acoustic Decibels

Generating 52 dB(A) at 23 feet inside its sealed fiberglass shell, this marine inverter is virtually undetectable over light harbor water lapping. The external PMGI inverter produces pure sine wave electricity with under 2 percent THD at 60 Hz, protecting sensitive inverter charger circuit boards. Fuel consumption drops to an ultra-efficient 0.22 GPH at 50 percent load, providing exceptional efficiency during long offshore passages.

Lazarette Mounting Siphon Protection Rules

Install the generator on flat structural stringers, leaving 10 inches of service clearance around capsule access panels. Install an anti-siphon valve on the raw-water injection hose at least 12 inches above the vessel static waterline to block siphon flooding. Ground wiring connects to the vessel bonding bus through an isolated ground return to prevent hull zinc erosion.

Physical Accessibility Scheduled Maintenance Protocol

Top access latches permit quick removal of the upper sound capsule for morning oil level dipstick inspections. This small inverter generator is not engineered for direct connection to three-phase vessel distribution boards, heavy 240V galley cooktops, or multi-compressor central chiller systems.

• Inspect raw-water discharge flow and sea strainer baskets before each shift.
• Drain engine crankcase oil and replace spin-on filter elements every 100 runtime hours.
• Examine raw-water pump neoprene impellers and clean fuel bowls every 250 runtime hours.

Warranty Statement Shipping Pallet Manifest

Fischer Panda backs this unit with a 2-Year limited marine warranty covering engine internals, alternator components, and the PMGI inverter. The wooden pallet delivers the Fischer Panda 5000i generator core, PMGI inverter module, remote control panel, wiring harness, oil drain hose, and instruction manual.