VEGE Remanufactured VD72 5.9L 360ci Car Truck Long Block Engine

Description

Solve chronic oil consumption issues with the VEGE VD72 Car Truck Long Block Engine. This 5.9L 360ci V8 configuration generates 230HP for rigorous commercial long block repower applications. Fleet mechanics must check oil pan depth clearance against steering linkages before bolting down motor mounts because rear sump configurations vary across model lines.

Dense ASTM Class 35 pearlitic iron lines the massive cylinder block of this VEGE remanufactured long block. A nodular iron micro-polished crankshaft spins inside deep skirted saddles to withstand persistent commercial hauling stress. Cranking draws 180A on standard 12V starter circuits. The unit weighs 520 lbs dry across an engine stance of 29in length by 26in width by 28in height with 5.5 quarts sump volume.

Key Features of VEGE VD72

Fleet operators buy VEGE VD72 Car Truck Long Block Engine packages to secure vehicle uptime during an industrial engine rebuild. Quality control technicians inspect cylinder deck surfaces using profilometers to confirm low Ra roughness values.

• Generous 360ci displacement produces substantial rotational pull across commercial route cycles.
• Cast iron cylinder heads feature induction hardened exhaust valve seats to eliminate fuel seat recession.
• Austenitic stainless steel valves maintain seating face integrity past 1,420°F exhaust temperatures.
• Copper lead bearings maintain 0.0016in oil clearances to support hydrodynamic boundary lubrication.
• The VD72 commercial core integrates a hydraulic flat tappet camshaft for quiet, dependable operation.
• Aluminum alloy hypereutectic pistons control thermal expansion to prevent cold bore scuffing.
• Double roller timing chain sets prevent camshaft timing drift over hundreds of operational hours.

Dynamic Dyno Load Evaluation

Controlled dyno load cycles stress the VD72 long block engine to verify durability. Dyno readouts record 230 continuous BHP and 330 ft-lbs torque output at 2,800 RPM. Main oil gallery pressure maintains 56 PSI at 190°F operating temperature. Exhaust gas sensors confirm safe 1,340°F heat thresholds. Individual cylinder compression stands at 178 PSI within 4% variance while crank runout checks out at 0.0003in TIR.

Field Service Protocols Clearance

Accelerator bellcranks operate with 5 lbs applied mechanical linkage pull force. Do not install this standard passenger car engine into severe duty industrial timber chippers subject to violent shock loading from unbuffered wood chipper drums.

• Perform fluid and spin-on filter changes at strict 3,500-mile or 120 run hours service marks.
• Verify hydraulic lifter preload every 30,000 miles to confirm valvetrain geometry.
• Check head fastener torque to 85 ft-lbs after the initial 60 hours in service.

Warranty Inclusions Product Manifest

Every motor conforms to the uncompromising VEGE assembly standard to guarantee field performance. Your purchase includes a 3-Year or 100,000-mile commercial limited parts warranty. The wood pallet crate contains the complete long block core, oil pan, front timing casing, valve covers, oil pump pickup tube, and signed dimensional inspection sheet.