VEGE Remanufactured 835C 2.2L 2164cc High Output Long Block Engine

Description

Oil pump front housing seal blowout causes catastrophic pressure loss on aged multi-stop transport sedans. The VEGE Remanufactured 835C 2.2L 2164cc High Output Long Block Engine terminates chronic oil consumption across this commercial long block repower. This 4-Cylinder 135HP powerplant requires careful timing belt tension spring verification prior to front cover completion.

ASTM A48 Class 30 gray iron forms the deep-skirt engine block for superior vibration damping. A balanced 4140 forged steel crankshaft drops into high-tin babbitt tri-metal shell bearings with cast iron main caps. This VEGE engine core requires a 12V 140A starter draw during cold morning rotations. Total dry weight measures 235 lbs, spanning a 23in length, 21in width, 25in height envelope with 4.3 quarts oil capacity.

Key Features of VEGE Remanufactured 835C

Regional transport teams buy VEGE Remanufactured 835C High Output Long Block Engine packages to avoid chronic roadside failures. Every industrial engine rebuild replaces aged oil pump housings with fresh diamond-machined billet aluminum units.

• Cylinder bores measure 3.425in with precision 45-degree plateau hone cross-hatching.
• Main journal oil clearance stays at 0.0013in for instantaneous film lubrication.
• Graphite-coated piston skirts minimize friction inside freshly honed iron sleeves.
• Dual balance shaft journals receive high-lubricity steel-backed bronze bushings.
• Viton front crank and rear main seals resist heat hardening under load.
• This 835C commercial core features cylinder head deck resurfacing flat to 0.0003in.
• Intake and exhaust valve stems undergo centerless grinding to factory stem runout.

Bench Dynamometer Load Records

Stationary water brake cell test sheets indicate this 835C long block engine produces 135 continuous BHP and 147 ft-lbs of torque at 3600 continuous load RPM. Internal oil gallery pressure measures 50 PSI while oil sump temp settles at 191°F under maximum continuous load. Exhaust gas temp tops out at 1240°F along the exhaust runner. Compression values register between 175 PSI and 183 PSI across all cylinders. Crankshaft center journal runout holds at 0.0002in TIR.

Installation Protocol Excluded Equipment

Manual clutch throwout fork assemblies need 5 lbs of release rod pull force for clean plate disengagement. This engine is not engineered for forced induction track conversions, wood chippers, or marine propulsion hulls.

• Drain initial break-in oil and filter at 500 miles or 25 operating hours.
• Adjust cold intake valve shim clearance to 0.009in and exhaust to 0.013in.
• Torque multi-point cylinder head bolts to 36 ft-lbs then add 90 degrees rotation.

Warranty Terms Crate Contents

Every long block produced under the VEGE assembly standard carries a 3-Year 100,000-mile parts protection agreement. Crated shipments contain the complete long block core, steel oil pan, front timing belt covers, cast valve cover, oil pickup screen, and certified dynamometer performance sheet.