Chevrolet Performance 19209705 Crate Engine Assembly

Description

Distributor housing cracking and poppet injector fuel dripping cause chronic misfires on hard-working utility pickups. The Chevrolet Performance 19209705 Crate Engine Assembly restores lost combustion power during this commercial long block repower. This 8-Cylinder 255HP Vortec engine requires distributor shaft gear engagement depth verification prior to tightening the hold-down clamp.

ASTM A48 Class 35 heavy cast iron forms the rigid four-bolt main cylinder block and Vortec cylinder heads. A nodular iron 3.480in stroke crankshaft spins within copper-lead tri-metal bearings inside line-honed main webs. This Chevrolet Performance engine core demands a 12V 170A starter draw during cold cranks. Dry weight is 435 lbs, spanning a 28in length, 25in width, 27in height envelope with 5.0 quarts oil capacity.

Key Features of Chevrolet Performance 19209705

Utility service supervisors buy Chevrolet Performance 19209705 Crate Engine Assembly inventory to avoid fleet downtime delays. Every industrial engine rebuild incorporates factory-new rotating components and genuine cast iron Vortec cylinder heads.

• Cylinder bores measure 4.000in with diamond plateau hone surface textures.
• Main bearing journal clearance holds at 0.0015in across all five main saddles.
• Hydraulic roller camshaft profiles deliver sustained low-end hauling torque.
• High-flow Vortec combustion chambers optimize fuel burn efficiency under load.
• Multi layer steel head gaskets lock combustion pressures inside cylinders.
• This 19209705 commercial core features factory precision balancing within two grams.
• Induction-hardened exhaust valve seats withstand severe commercial duty heat.

Dynamometer Test Station Data

Factory dyno validation testing demonstrates that this 19209705 long block engine generates 255 continuous BHP and 330 ft-lbs of torque at 2800 continuous load RPM. Internal oil gallery pressure measures 55 PSI while oil sump temp levels at 194°F under continuous brake testing. Exhaust gas temp holds at 1280°F along the manifold collector. Cylinder compression measures between 175 PSI and 182 PSI across all eight cylinders. Crankshaft center journal runout checks out at 0.0003in TIR.

Field Installation Setup Guidelines

Throttle cable linkages need 5 lbs of pull force to maintain smooth throttle body blade movement without sticking. This factory truck crate engine is not engineered for high-RPM marine race boats, dry-sump track cars, or aviation airframes.

• Evacuate initial break-in petroleum motor oil after 500 miles or 30 run hours.
• Check hydraulic roller lifter preload at zero lash plus one quarter turn.
• Torque cylinder head bolts in three stages to 65 ft-lbs final specification.

Factory Warranty Crate Contents

Backed by the Chevrolet Performance assembly standard, this genuine crate motor includes a 3-Year 100,000-mile parts warranty. Each heavy wooden crate contains the assembled long block engine, oil pan, front timing cover, valve covers, oil pump pickup tube, and signed factory build paperwork.