Taco 1632E 1600 Series Centrifugal Pump 3/4HP 1PH

Handle high-flow secondary circulation with Taco 1632E 3/4 HP single-phase centrifugal pump for closed-loop commercial HVAC. Its 115 or 230-volt motor supports up to 145 GPM and 44 feet of head through a 2-inch flanged connection. The 60-pound dry weight affects lifting and support planning. Confirm electrical current, system curve, flange fit, and service clearance before installation.

The 1632E uses a cast-iron pump assembly with a 3/4 HP single-phase motor configured for 115V or 230V service. Full-load current is listed as 10.6A or 5.3A, while the published maximums reach 145 GPM and 44 feet of head. The supplied application covers closed-loop commercial HVAC. Impeller material, seal construction, RPM, dimensions, pressure, temperature, and flange-to-flange length are not stated.

Key Features & Benefits

• 3/4 HP Single-Phase Motor: Supports commercial HVAC loops using verified 115 or 230-volt service.
• 145 GPM Maximum Flow: Provides a stated reference for high-flow secondary circulation.
• 44 Feet Maximum Head: Helps evaluate system resistance and elevation requirements.
• 2-Inch Flange: Supports replacement planning when the piping interface matches.
• 10.6A/5.3A Full-Load Current: Assists circuit and disconnect review at the listed voltages.
• 60-Pound Dry Weight: Helps plan lifting, pipe supports, and service access.

Why Choose Taco 1632E Single-Phase

The Taco 1632E provides high-flow commercial HVAC circulation with single-phase voltage options and published hydraulic data. It suits secondary loops where a 2-inch flanged pump must move substantial water volume.

• Build: The cast-iron body and single-phase centrifugal arrangement define the supplied assembly.
• Value: Dual-voltage service can simplify replacement planning where three-phase power is unavailable.
• Audience: Fits commercial HVAC contractors, facility engineers, boiler technicians, and maintenance teams.

Applications & Use Cases

Use this pump in closed-loop commercial HVAC systems within the listed 145 GPM and 44-foot limits. Check the 2-inch flange, pipe supports, valve clearance, motor access, 60-pound handling requirement, and electrical current before installation. Verify missing dimensions, pressure, temperature, and seal details through the manufacturer’s documentation.

Warranty & Support

• Warranty Terms: Warranty duration, coverage, exclusions, and registration requirements require confirmation from the authorized seller.
• Service Requirements: Confirm whether authorized service is required for warranty claims.
• Model Verification: Match Taco 1632E, 3/4 HP, single-phase configuration, and SKU 1632E-1 to the seller’s order documentation.

Verify 115 or 230-volt service, align the 2-inch flange, purge air, inspect strainers, and support the 60-pound assembly during installation. Select the operating point from the actual system curve. Purchase the Taco 1632E single-phase centrifugal pump at Mulmotor.com for genuine equipment, applicable warranty coverage, and pump support.